What is a Decarbonization annealing heating furnace? Introduction to the advantages, characteristics, and principles of the Forging furnace

Decarbonization annealing heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，The overall structural design is simple and novel.，it is mainly composed of Radiation chamber, convection chamber, furnace chamber, ventilation system and furnace chamber，is a kind of high quality and low price Decarbonization annealing heating furnace，it is an ideal choice for customers to buy Decarbonization annealing heating furnace。

1、Brief introduction of Decarbonization annealing heating furnace

Decarbonization annealing heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Decarbonization annealing heating furnace

2、Decarbonization annealing heating furnace application

Decarbonization annealing heating furnaces have the following purposes.

1. Improve production efficiency

The Decarbonization annealing heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal heat treatment

In addition to forging heating, Decarbonization annealing heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The Decarbonization annealing heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal forging heating

The Decarbonization annealing heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal heat treatment

In addition to forging heating, Decarbonization annealing heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Decarbonization annealing heating furnace

3、Advantages of Decarbonization annealing heating furnace principle

Decarbonization annealing heating furnacein the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the product looks beautiful.。

Decarbonization annealing heating furnace

4、Functional advantages of Decarbonization annealing heating furnace

Decarbonization annealing heating furnaces have the following advantages.

1. Intelligent control

The Decarbonization annealing heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Multiple fuel options

Although the Decarbonization annealing heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Efficient combustion

The Decarbonization annealing heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Extend the service life of equipment

The Decarbonization annealing heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. easy to operate

The operation interface of the Decarbonization annealing heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Decarbonization annealing heating furnace

5、Decarbonization annealing heating furnace video

The following is the live video of Decarbonization annealing heating furnace designed and produced by One-combustion energy saving for users, from which we can see the It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials. of One-combustion energy savingDecarbonization annealing heating furnace.。

Decarbonization annealing heating furnace

As you can see from the live video.，One-combustion energy saving it is mainly composed of combustor, Radiation chamber, recovery of waste heat, ventilation system and ventilation system。

6、Decarbonization annealing heating furnace function

Decarbonization annealing heating furnacemultifunctional, with functions such as temper, heat treatment, quench, Forging heating and Casting heating，at runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it is widely used in pharmacy, shipping, Household necessities, chemical industry, automobile and other industries。

Decarbonization annealing heating furnace

Decarbonization annealing heating furnaceWidely used in Metal tempering, Energy conservation and environmental protection, Metal heat treatment, Metal forging heating and Improve production efficiency，the product looks atmospheric.，is a kind of high quality and low price Decarbonization annealing heating furnace。