Introduction to Stress relief furnace, forging furnace specifications, model parameters

Stress relief furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，customizable。

1、Brief introduction of Stress relief furnace

Stress relief furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it has the functions of quench, hardening and tempering, heat treatment, normalizing and temper，is an advanced Stress relief furnace developed by our company in combination with the actual situation of the industry。

Stress relief furnace

2、Stress relief furnace HD real picture

The panoramic shooting of One-combustion energy saving Stress relief furnace is shown as follows.。

Stress relief furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Introduction of advantages of Stress relief furnace

The advantages of Stress relief furnace are as follows:

1. Rapid temperature rise

The Stress relief furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Improve product quality

Because the Stress relief furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Efficient combustion

The Stress relief furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Stress relief furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Intelligent control

The Stress relief furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Stress relief furnace

4、Stress relief furnace function

Stress relief furnacemultifunctional, with functions such as hardening and tempering, quench, anneal, heat treatment and Casting heating，the main features are energy-efficient, energy saving and environmental protection, Easy to control, energy-efficient and Strong adaptability，it is mainly composed of convection chamber, Radiation chamber, ventilation system, recovery of waste heat and ventilation system，This Stress relief furnaceThe structural design is simple, novel and special.，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，it is an ideal choice for customers to buy Stress relief furnace。

Stress relief furnace

5、Structural characteristics of Stress relief furnace

The Stress relief furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Radiation chamber

The heat load of the main place for Stress relief furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Stress relief furnace

Stress relief furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，It is a forging heating device using gas as fuel.。