What is a Continuous Annealing Heating Furnace? How much is the price of the heating furnace?

Continuous Annealing Heating FurnaceIt is a forging heating device using gas as fuel.，it has been widely used in aerospace, building materials, petroleum, pharmacy, shipping and other industries，Commonly used inMetal heat treatment,Metal forging heating,Metal melting and casting,Metal tempering,Energy conservation and environmental protection and so on。The following is to introduce the Continuous Annealing Heating Furnace:

1、Brief introduction of Continuous Annealing Heating Furnace

Continuous Annealing Heating FurnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Structure consists of combustor, combustor, ventilation system, Radiation chamber, ventilation system and so on，This Continuous Annealing Heating FurnaceThe structure is novel, special, advanced, reasonable and scientific.，is a kind of high quality and low price Continuous Annealing Heating Furnace，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，widely used inlight industry,war industry,metallurgy,material,war industry and other industries。

Continuous Annealing Heating Furnace

2、Continuous Annealing Heating Furnace real shot picture

Exquisite design, advanced technology and complete sizes and models are available for customers to choose at will.。

Continuous Annealing Heating Furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Introduction of Continuous Annealing Heating Furnace characteristics

Continuous Annealing Heating Furnace has the following characteristics

1. Stable and reliable

The Continuous Annealing Heating Furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to maintain

The structural design of the Continuous Annealing Heating Furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Stable and reliable

The Continuous Annealing Heating Furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Continuous Annealing Heating Furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Continuous Annealing Heating Furnace

4、Introduction of advantages of Continuous Annealing Heating Furnace

Continuous Annealing Heating Furnaces have the following advantages.

1. Uniform heating

The Continuous Annealing Heating Furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Wide application range

The Continuous Annealing Heating Furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Improve product quality

Because the Continuous Annealing Heating Furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Continuous Annealing Heating Furnace can significantly reduce energy consumption, thus reducing operating costs.

Continuous Annealing Heating Furnace

5、Continuous Annealing Heating Furnace function

Continuous Annealing Heating Furnacemultifunctional, with functions such as Forging heating, temper, anneal, normalizing and temper。

Continuous Annealing Heating Furnace

6、How much is the Continuous Annealing Heating Furnace?

The Continuous Annealing Heating Furnace price is introduced as follows:

1. Company size

One-combustion energy saving is a self-produced and self-sold Continuous Annealing Heating Furnace, and has rich experience in the production and manufacturing of Continuous Annealing Heating Furnace. In the process of production and manufacturing, there is less waste of resources, and the corresponding product prices are also low.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Continuous Annealing Heating Furnace have more or less differences in price.

3. regional difference

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving the address is located at:Shandong(Province), where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

4. deploy

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Continuous Annealing Heating Furnace are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Continuous Annealing Heating Furnace, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Continuous Annealing Heating Furnace

Continuous Annealing Heating Furnacethe main features are energy-efficient, Easy to maintain, energy saving and environmental protection, Stable and reliable and Easy to control，is a Continuous Annealing Heating Furnace，is a common Continuous Annealing Heating Furnace。