Introduction to Dual station annealing industrial furnace and Forging furnace working principle

Dual station annealing industrial furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it has the functions of Forging heating, normalizing, anneal, quench and Casting heating。The following is to introduce the Dual station annealing industrial furnace:

1、Brief introduction of Dual station annealing industrial furnace

Dual station annealing industrial furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the product looks beautiful.，it is an ideal choice for customers to buy Dual station annealing industrial furnace。

Dual station annealing industrial furnace

2、Dual station annealing industrial furnace use

The purpose of Dual station annealing industrial furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Dual station annealing industrial furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Dual station annealing industrial furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Energy conservation and environmental protection

The Dual station annealing industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal forging heating

The Dual station annealing industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal tempering

By properly heating and cooling the metal material, the Dual station annealing industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Dual station annealing industrial furnace

3、Dual station annealing industrial furnace use

The purpose of Dual station annealing industrial furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Dual station annealing industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Dual station annealing industrial furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Energy conservation and environmental protection

The Dual station annealing industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Improve production efficiency

The Dual station annealing industrial furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Dual station annealing industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Dual station annealing industrial furnace

4、Introduction of advantages of Dual station annealing industrial furnace

The advantages of Dual station annealing industrial furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. easy to operate

The operation interface of the Dual station annealing industrial furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Intelligent control

The Dual station annealing industrial furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Improve product quality

Because the Dual station annealing industrial furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Rapid temperature rise

The Dual station annealing industrial furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Dual station annealing industrial furnace

5、Dual station annealing industrial furnace characteristics

The Dual station annealing industrial furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the Dual station annealing industrial furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Dual station annealing industrial furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

3. Stable and reliable

The Dual station annealing industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Efficient heating

The Dual station annealing industrial furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. Easy to maintain

The structural design of the Dual station annealing industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Dual station annealing industrial furnace

6、How much is the Dual station annealing industrial furnace?

The Dual station annealing industrial furnace price is introduced as follows:

1. Brand strength

At present, there are various brands of Dual station annealing industrial furnace in Shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Dual station annealing industrial furnace are different.

2. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

3. Proper management mode

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Dual station annealing industrial furnace is low.

4. Different regions

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

5. Reasonable cost

If the cost of the product is high, the selling price of the product will be high, so the cost input is an important factor that causes the price change of the Dual station annealing industrial furnace.

Dual station annealing industrial furnace

Dual station annealing industrial furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，It has the functions of Metal heat treatment, Metal forging heating, Metal melting and casting, Energy conservation and environmental protection and Metal heat treatment，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。