Introduction to Split type annealing furnace, Forging furnace specifications, model parameters

Split type annealing furnaceIt is a forging heating device using gas as fuel.，It has a wide range of uses, including Metal tempering, Energy conservation and environmental protection, Energy conservation and environmental protection, Improve production efficiency and Metal forging heating。The following is to introduce the Split type annealing furnace:

1、Brief introduction of Split type annealing furnace

Split type annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a Split type annealing furnace，it has been widely used in automobile, pharmacy, shipping, material, building materials and other industries，it is an ideal choice for customers to buy Split type annealing furnace。

Split type annealing furnace

2、Split type annealing furnace HD real shot

On-site aerial photography of Split type annealing furnace。

Split type annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

3、Split type annealing furnace principle

Split type annealing furnaceat runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is a kind of high quality and low price Split type annealing furnace，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，the main structure includes combustor, recovery of waste heat, Radiation chamber, combustor, ventilation system and so on，Split type annealing furnaceThe structure is novel, special, advanced, reasonable and scientific.，is carefully developed by One-combustion energy saving combined with advanced technology。

Split type annealing furnace

4、Structural characteristics of Split type annealing furnace

The Split type annealing furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for Split type annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Split type annealing furnace

5、Split type annealing furnace function

Split type annealing furnaceit has the functions of temper, quench, hardening and tempering, Casting heating and anneal。

Split type annealing furnace

6、company profile

One-combustion energy saving, as one of the professional and powerful Split type annealing furnace manufacturers in Jinan, produces Split type annealing furnace with reliable quality, affordable price and perfect after-sales, which have been successfully practiced in many processing plants at home and abroad.。

One-combustion energy saving

Split type annealing furnaceis a Split type annealing furnace，it can be used in electron, metallurgy, heat treatment, aerospace, chemical industry and other industries，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。