Introduction to Continuous tempering industrial furnace, how much is the price of the forging furnace?

Continuous tempering industrial furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，The structural design is more advanced and reasonable.，it is mainly composed of furnace chamber, combustor, ventilation system, ventilation system and Radiation chamber，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，it is an ideal choice for customers to buy Continuous tempering industrial furnace。

1、Brief introduction of Continuous tempering industrial furnace

Continuous tempering industrial furnaceIt is a forging heating device using gas as fuel.，at work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，customizable。

Continuous tempering industrial furnace

2、Continuous tempering industrial furnace use

The purpose of Continuous tempering industrial furnace is introduced as follows:

1. Energy conservation and environmental protection

The Continuous tempering industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Continuous tempering industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal tempering

By properly heating and cooling the metal material, the Continuous tempering industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, Continuous tempering industrial furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Improve production efficiency

The Continuous tempering industrial furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Continuous tempering industrial furnace

3、Structural advantages of Continuous tempering industrial furnace

The Continuous tempering industrial furnace has the following structure

1. Radiation chamber

The heat load of the main place for Continuous tempering industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. Radiation chamber

The heat load of the main place for Continuous tempering industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Continuous tempering industrial furnace

4、Introduction of advantages of Continuous tempering industrial furnace

The advantages of Continuous tempering industrial furnace are as follows:

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the Continuous tempering industrial furnace can significantly reduce energy consumption, thus reducing operating costs.

2. Multiple fuel options

Although the Continuous tempering industrial furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Intelligent control

The Continuous tempering industrial furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Efficient combustion

The Continuous tempering industrial furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. easy to operate

The operation interface of the Continuous tempering industrial furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Continuous tempering industrial furnace

5、Continuous tempering industrial furnace function

Continuous tempering industrial furnaceit has the functions of heat treatment, hardening and tempering, normalizing, Casting heating and heat treatment，It can be used for Improve production efficiency, Metal melting and casting, Energy conservation and environmental protection, Metal tempering, Improve production efficiency, Metal forging heating and so on，has been favored by more and more customers.。

Continuous tempering industrial furnace

6、One-combustion energy saving delivery site

You can buy Continuous tempering industrial furnace according to your needs and show you product videos.。

Continuous tempering industrial furnace

As you can see from the live video.One-combustion energy saving the product looks beautiful.。

Continuous tempering industrial furnaceWidely used inMetal forging heating,Improve production efficiency,Metal forging heating,Metal tempering,Metal heat treatment and so on，multifunctional, with functions such as normalizing, temper, anneal, quench and hardening and tempering。