Introduction to High temperature rapid quenching heat treatment furnace, forging furnace specifications, model parameters

High temperature rapid quenching heat treatment furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is developed and improved by One-combustion energy saving。The following is to introduce the High temperature rapid quenching heat treatment furnace:

1、Brief introduction of High temperature rapid quenching heat treatment furnace

High temperature rapid quenching heat treatment furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，multifunctional, with functions such as temper, hardening and tempering, heat treatment, quench and temper，the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，is a kind of high quality and low price High temperature rapid quenching heat treatment furnace，the product looks atmospheric.。

High temperature rapid quenching heat treatment furnace

2、Introduction of advantages of High temperature rapid quenching heat treatment furnace

High temperature rapid quenching heat treatment furnaces have the following advantages.

1. Extend the service life of equipment

The High temperature rapid quenching heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Multiple fuel options

Although the High temperature rapid quenching heat treatment furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Intelligent control

The High temperature rapid quenching heat treatment furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. easy to operate

The operation interface of the High temperature rapid quenching heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

High temperature rapid quenching heat treatment furnace

3、High temperature rapid quenching heat treatment furnace video live broadcast

On-site aerial photography of High temperature rapid quenching heat treatment furnace。

High temperature rapid quenching heat treatment furnace

As you can see from the live video.，One-combustion energy saving Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.。

4、High temperature rapid quenching heat treatment furnace use

The purpose of High temperature rapid quenching heat treatment furnace is introduced as follows:

1. Energy conservation and environmental protection

The High temperature rapid quenching heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Improve production efficiency

The High temperature rapid quenching heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal heat treatment

In addition to forging heating, High temperature rapid quenching heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the High temperature rapid quenching heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal forging heating

The High temperature rapid quenching heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

High temperature rapid quenching heat treatment furnace

5、High temperature rapid quenching heat treatment furnace structure composition

The High temperature rapid quenching heat treatment furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Radiation chamber

The heat load of the main place for High temperature rapid quenching heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

High temperature rapid quenching heat treatment furnace

6、High temperature rapid quenching heat treatment furnace function

High temperature rapid quenching heat treatment furnaceit has the functions of normalizing, anneal, Casting heating, Forging heating and hardening and tempering，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，generally, it is composed of furnace chamber, convection chamber, ventilation system, recovery of waste heat, convection chamber and other major components，This High temperature rapid quenching heat treatment furnaceThe overall structural design is relatively simple and compact.。

High temperature rapid quenching heat treatment furnace

High temperature rapid quenching heat treatment furnaceusually used in shipping, war industry, metallurgy, heat treatment, petroleum and other fields，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。