Introduction to Double chamber quenching industrial furnace and Forging furnace advantages and features

Double chamber quenching industrial furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，support customization。The following is to introduce the Double chamber quenching industrial furnace:

1、Brief introduction of Double chamber quenching industrial furnace

Double chamber quenching industrial furnaceIt is a forging heating device using gas as fuel.，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，It is mostly used in Metal forging heating, Energy conservation and environmental protection, Metal heat treatment, Metal tempering, Metal tempering, Metal forging heating and so on，the product looks beautiful.，it has the functions of Forging heating, quench, normalizing, anneal and Casting heating。

Double chamber quenching industrial furnace

2、Double chamber quenching industrial furnace structure composition

The Double chamber quenching industrial furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. Radiation chamber

The heat load of the main place for Double chamber quenching industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Double chamber quenching industrial furnace

3、Advantages of Double chamber quenching industrial furnace principle

Double chamber quenching industrial furnaceat runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，Commonly used inImprove production efficiency,Metal heat treatment,Energy conservation and environmental protection,Metal melting and casting,Metal heat treatment and so on，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，has been favored by more and more customers.。

Double chamber quenching industrial furnace

4、Double chamber quenching industrial furnace application

Double chamber quenching industrial furnaces have the following purposes.

1. Energy conservation and environmental protection

The Double chamber quenching industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Improve production efficiency

The Double chamber quenching industrial furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The Double chamber quenching industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal tempering

By properly heating and cooling the metal material, the Double chamber quenching industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Energy conservation and environmental protection

The Double chamber quenching industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Double chamber quenching industrial furnace

5、Double chamber quenching industrial furnace performance advantage

Double chamber quenching industrial furnaces have the following advantages.

1. Efficient combustion

The Double chamber quenching industrial furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Rapid temperature rise

The Double chamber quenching industrial furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Double chamber quenching industrial furnace can significantly reduce energy consumption, thus reducing operating costs.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Multiple fuel options

Although the Double chamber quenching industrial furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Double chamber quenching industrial furnace

6、Working principle of Double chamber quenching industrial furnace

Double chamber quenching industrial furnacethe principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it is widely used inelectron,war industry,shipping,Machinery manufacturing,material and other industries，is a kind of Double chamber quenching industrial furnace manufactured by One-combustion energy saving。

Double chamber quenching industrial furnace

Double chamber quenching industrial furnacethe product looks atmospheric.，is a kind of high quality and low price Double chamber quenching industrial furnace，multifunctional, with functions such as hardening and tempering, heat treatment, temper, Forging heating and Casting heating。