What is a Split type quenching heating furnace? How much is the price of the forging furnace?

Split type quenching heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a common Split type quenching heating furnace，the main structure includes combustor, furnace chamber, convection chamber, ventilation system, recovery of waste heat and so on，Split type quenching heating furnaceThe overall structural design is simple, diverse and beautiful.。

1、Brief introduction of Split type quenching heating furnace

Split type quenching heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the product looks atmospheric.，be loved by our customers.。

Split type quenching heating furnace

2、Introduction of Split type quenching heating furnace characteristics

Split type quenching heating furnace has the following characteristics

1. Easy to maintain

The structural design of the Split type quenching heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Easy to maintain

The structural design of the Split type quenching heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Split type quenching heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

5. Efficient heating

The Split type quenching heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Split type quenching heating furnace

3、Split type quenching heating furnace HD real picture

One-combustion energy saving Split type quenching heating furnacethe product looks atmospheric., the following is a panoramic shot of the Split type quenching heating furnace for your reference.。

Split type quenching heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Split type quenching heating furnace principle

Split type quenching heating furnaceat the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

Split type quenching heating furnace

5、Split type quenching heating furnace application

Split type quenching heating furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Split type quenching heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal heat treatment

In addition to forging heating, Split type quenching heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Split type quenching heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal heat treatment

In addition to forging heating, Split type quenching heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal tempering

By properly heating and cooling the metal material, the Split type quenching heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Split type quenching heating furnace

6、How much is the Split type quenching heating furnace?

The Split type quenching heating furnace price is introduced as follows:

1. Product technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

2. Brand strength

At present, there are various brands of Split type quenching heating furnace in Shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Split type quenching heating furnace are different.

3. product configuration

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Split type quenching heating furnace has a higher cost performance.

4. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Split type quenching heating furnace have more or less differences in price.

5. Product technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

Split type quenching heating furnace

Split type quenching heating furnaceMainly used forMetal forging heating,Metal melting and casting,Energy conservation and environmental protection,Improve production efficiency andMetal tempering，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。