Introduction to Thermal insulation and tempering industrial furnace, Forging furnace specifications, model parameters

Thermal insulation and tempering industrial furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，was developed and designed by One-combustion energy saving。The following is to introduce the Thermal insulation and tempering industrial furnace:

1、Brief introduction of Thermal insulation and tempering industrial furnace

Thermal insulation and tempering industrial furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，The overall structural design is simple, diverse and beautiful.，it has the structure of ventilation system, Radiation chamber, recovery of waste heat, ventilation system and furnace chamber，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。

Thermal insulation and tempering industrial furnace

2、Introduction of advantages of Thermal insulation and tempering industrial furnace

The advantages of Thermal insulation and tempering industrial furnace are as follows:

1. Uniform heating

The Thermal insulation and tempering industrial furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Multiple fuel options

Although the Thermal insulation and tempering industrial furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Intelligent control

The Thermal insulation and tempering industrial furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Efficient combustion

The Thermal insulation and tempering industrial furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Thermal insulation and tempering industrial furnace

3、Thermal insulation and tempering industrial furnace display

Provide a variety of specifications and models of Thermal insulation and tempering industrial furnace, high-definition picture list.。

Thermal insulation and tempering industrial furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Thermal insulation and tempering industrial furnace structure

The Thermal insulation and tempering industrial furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. furnace chamber

A space for holding metallic materials for heating.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Radiation chamber

The heat load of the main place for Thermal insulation and tempering industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Thermal insulation and tempering industrial furnace

5、Thermal insulation and tempering industrial furnace principle

Thermal insulation and tempering industrial furnaceThe high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Thermal insulation and tempering industrial furnace

6、Thermal insulation and tempering industrial furnace price concessions

The Thermal insulation and tempering industrial furnace price is introduced as follows:

1. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Thermal insulation and tempering industrial furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Thermal insulation and tempering industrial furnace price can meet the purchasing needs of customers.

2. deploy

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Thermal insulation and tempering industrial furnace, which is beyond doubt. One-combustion energy saving makes every product with great care in the attitude of being highly responsible to customers, so the price of One-combustion energy saving Thermal insulation and tempering industrial furnace is reasonable for products with the same configuration.

3. market quotation

The degree of market competition is also an important factor affecting the price change of products. In order to improve the purchasing power of customers, manufacturers will take preferential measures and appropriately reduce prices.

4. Quality advantages and disadvantages

The price of Thermal insulation and tempering industrial furnace is affected by the quality of products. Only when the products are of good quality can we create greater profits for customers and recover the costs for customers as soon as possible. However, products with good quality have a lot of investment in technology, manpower and time, so their prices are higher than those of ordinary products. On the contrary, the products of general quality are equal in effort and gain, and the sales price is also low. But there are exceptions. Many manufacturers often adopt the mode of small profits but quick turnover. If customers can choose products with high cost performance, it is a good choice for long-term investment.

5. technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

Thermal insulation and tempering industrial furnace

Thermal insulation and tempering industrial furnaceit has been widely used in electron, surface treatment, metallurgy, material, automobile and other industries，is a common Thermal insulation and tempering industrial furnace，at the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。