What is a Heat treatment furnace chamber type? Introduction to the principle of heating furnace structure

Heat treatment furnace chamber typeIt is an efficient, energy-saving and environment-friendly metal heating device.，customizable。

1、Brief introduction of Heat treatment furnace chamber type

Heat treatment furnace chamber typeIt is a forging heating device using gas as fuel.，it has the structure of ventilation system, ventilation system, Radiation chamber, Radiation chamber and convection chamber，This productThe overall structural design is simple and novel.，is a popular Heat treatment furnace chamber type。

Heat treatment furnace chamber type

2、Heat treatment furnace chamber type HD real shot

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Heat treatment furnace chamber typet operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Heat treatment furnace chamber type

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd is a Heat treatment furnace chamber type。

3、Introduction of Heat treatment furnace chamber type characteristics

Heat treatment furnace chamber type has the following characteristics

1. Strong adaptability

The Heat treatment furnace chamber type can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Easy to maintain

The structural design of the Heat treatment furnace chamber type is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Easy to control

The combustion system and ventilation system of the Heat treatment furnace chamber type can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Heat treatment furnace chamber types are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Easy to maintain

The structural design of the Heat treatment furnace chamber type is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Heat treatment furnace chamber type

4、Advantages of Heat treatment furnace chamber type principle

Heat treatment furnace chamber typeHeat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

Heat treatment furnace chamber type

5、Structural characteristics of Heat treatment furnace chamber type

The Heat treatment furnace chamber type has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. Radiation chamber

The heat load of the main place for Heat treatment furnace chamber type heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Heat treatment furnace chamber type

6、How much is the Heat treatment furnace chamber type?

The Heat treatment furnace chamber type price is introduced as follows:

1. Company size

One-combustion energy saving is a self-produced and self-sold Heat treatment furnace chamber type, and has rich experience in the production and manufacturing of Heat treatment furnace chamber type. In the process of production and manufacturing, there is less waste of resources, and the corresponding product prices are also low.

2. Less intermediate links

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

3. product configuration

Products of the same style, different configurations, the product price is definitely different, therefore, the Heat treatment furnace chamber type price is affected by the configuration, and the price varies.

4. technology content

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

5. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Heat treatment furnace chamber type have more or less differences in price.

Heat treatment furnace chamber type

Heat treatment furnace chamber typethe advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，It has a wide range of uses, including Metal forging heating, Energy conservation and environmental protection, Metal tempering, Metal forging heating and Metal melting and casting，the product looks atmospheric.。