What is a Industrial furnace chamber type? Introduction to the Working Principle of Forging furnace

Industrial furnace chamber typeIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it is widely used in automobile, aerospace, chemical industry, building materials, material and other industries，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，at work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，was developed and designed by One-combustion energy saving。

1、Brief introduction of Industrial furnace chamber type

Industrial furnace chamber typeIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，multifunctional, with functions such as heat treatment, Forging heating, temper, quench and Casting heating，The overall structural design is relatively simple，it is mainly composed of convection chamber, combustor, Radiation chamber, recovery of waste heat and furnace chamber。

Industrial furnace chamber type

2、Industrial furnace chamber type function

Industrial furnace chamber typemultifunctional, with functions such as normalizing, hardening and tempering, heat treatment, quench and temper，in the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，the main features are energy-efficient, Easy to control, Stable and reliable, Strong adaptability and energy saving and environmental protection。

Industrial furnace chamber type

3、Industrial furnace chamber type performance advantage

Industrial furnace chamber types have the following advantages.

1. Improve product quality

Because the Industrial furnace chamber type can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Industrial furnace chamber type can significantly reduce energy consumption, thus reducing operating costs.

3. Multiple fuel options

Although the Industrial furnace chamber type mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Intelligent control

The Industrial furnace chamber type is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Uniform heating

The Industrial furnace chamber type adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Industrial furnace chamber type

4、Industrial furnace chamber type application

Industrial furnace chamber types have the following purposes.

1. Energy conservation and environmental protection

The Industrial furnace chamber type uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the Industrial furnace chamber type can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal heat treatment

In addition to forging heating, Industrial furnace chamber types can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Improve production efficiency

The Industrial furnace chamber type has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Energy conservation and environmental protection

The Industrial furnace chamber type uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Industrial furnace chamber type

5、Structural advantages of Industrial furnace chamber type

The Industrial furnace chamber type has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. Radiation chamber

The heat load of the main place for Industrial furnace chamber type heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Industrial furnace chamber type

6、Industrial furnace chamber type function

Industrial furnace chamber typeit has the functions of normalizing, anneal, hardening and tempering, Forging heating and Casting heating，generally, it is composed of ventilation system, Radiation chamber, combustor, ventilation system, ventilation system and other major components，the product looks beautiful.，is a kind of high quality and low price Industrial furnace chamber type，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Industrial furnace chamber type

Industrial furnace chamber typefeatures include Strong adaptability, Stable and reliable, Easy to maintain, Strong adaptability and energy saving and environmental protection，the product looks atmospheric.。