Introduction to Regenerative chamber heating furnace and forging furnace working principle

Regenerative chamber heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

1、Brief introduction of Regenerative chamber heating furnace

Regenerative chamber heating furnaceIt is a forging heating device using gas as fuel.，it has been widely used in surface treatment, machinery, building materials, petroleum, metallurgy and other industries，support customization。

Regenerative chamber heating furnace

2、Regenerative chamber heating furnace performance advantage

The advantages of Regenerative chamber heating furnace are as follows:

1. Intelligent control

The Regenerative chamber heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Multiple fuel options

Although the Regenerative chamber heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Regenerative chamber heating furnace can significantly reduce energy consumption, thus reducing operating costs.

4. easy to operate

The operation interface of the Regenerative chamber heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Uniform heating

The Regenerative chamber heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Regenerative chamber heating furnace

3、Regenerative chamber heating furnace characteristics

The Regenerative chamber heating furnace features are as follows:

1. Strong adaptability

The Regenerative chamber heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Efficient heating

The Regenerative chamber heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to maintain

The structural design of the Regenerative chamber heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Regenerative chamber heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Regenerative chamber heating furnace

4、Regenerative chamber heating furnace use

The purpose of Regenerative chamber heating furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Regenerative chamber heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The Regenerative chamber heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The Regenerative chamber heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Regenerative chamber heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Energy conservation and environmental protection

The Regenerative chamber heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Regenerative chamber heating furnace

5、Structural advantages of Regenerative chamber heating furnace

The Regenerative chamber heating furnace has the following structure

1. Radiation chamber

The heat load of the main place for Regenerative chamber heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Regenerative chamber heating furnace

6、On-site real shot of Regenerative chamber heating furnace

One-combustion energy saving Regenerative chamber heating furnace HD picture, panoramic shooting。

Regenerative chamber heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Regenerative chamber heating furnaceit is widely used in heat treatment, Machinery manufacturing, pharmacy, shipping and Household necessities，at work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。