Introduction to Multi tube industrial furnace, forging furnace specifications, model parameters

Multi tube industrial furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks beautiful.，it is an ideal choice for customers to buy Multi tube industrial furnace。

1、Brief introduction of Multi tube industrial furnace

Multi tube industrial furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，at the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it has the functions of temper, Casting heating, heat treatment, hardening and tempering and quench。

Multi tube industrial furnace

2、Multi tube industrial furnace function

Multi tube industrial furnaceit has the functions of normalizing, temper, anneal, Forging heating and Casting heating。

Multi tube industrial furnace

3、Multi tube industrial furnace real shot picture

A high-definition picture list of Multi tube industrial furnace is available for our customers to visit. The physical visit can be made to the factory. The address of the visit is Shandong(Province), and the time can be reserved in advance. The manufacturer has a special person to receive it.。

Multi tube industrial furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Multi tube industrial furnace performance advantage

Multi tube industrial furnaces have the following advantages.

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Uniform heating

The Multi tube industrial furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Improve product quality

Because the Multi tube industrial furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. easy to operate

The operation interface of the Multi tube industrial furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Wide application range

The Multi tube industrial furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Multi tube industrial furnace

5、Multi tube industrial furnace use

The purpose of Multi tube industrial furnace is introduced as follows:

1. Energy conservation and environmental protection

The Multi tube industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Multi tube industrial furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal heat treatment

In addition to forging heating, Multi tube industrial furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Improve production efficiency

The Multi tube industrial furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Energy conservation and environmental protection

The Multi tube industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Multi tube industrial furnace

Multi tube industrial furnaceThe user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，it is usually composed of Radiation chamber, furnace chamber, recovery of waste heat, combustor and ventilation system，Multi tube industrial furnaceSimple structure and reliable operation.。