Introduction to Heat treatment tube quenching furnace and heating furnace structure principle

Heat treatment tube quenching furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a common Heat treatment tube quenching furnace，has been favored by more and more customers.。The following is to introduce the Heat treatment tube quenching furnace:

1、Brief introduction of Heat treatment tube quenching furnace

Heat treatment tube quenching furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the main features are Strong adaptability, energy saving and environmental protection, Easy to control, Stable and reliable and Easy to maintain，The overall structural design is simple, diverse and beautiful.，it has the structure of furnace chamber, convection chamber, combustor, recovery of waste heat and ventilation system，it has the functions of quench, Forging heating, normalizing, anneal and temper。

Heat treatment tube quenching furnace

2、Heat treatment tube quenching furnace use

The purpose of Heat treatment tube quenching furnace is introduced as follows:

1. Energy conservation and environmental protection

The Heat treatment tube quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Heat treatment tube quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal tempering

By properly heating and cooling the metal material, the Heat treatment tube quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, Heat treatment tube quenching furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal forging heating

The Heat treatment tube quenching furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Heat treatment tube quenching furnace

3、Heat treatment tube quenching furnace structure composition

The Heat treatment tube quenching furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Radiation chamber

The heat load of the main place for Heat treatment tube quenching furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Heat treatment tube quenching furnace

4、Heat treatment tube quenching furnace function

Heat treatment tube quenching furnacemultifunctional, with functions such as hardening and tempering, Casting heating, heat treatment, quench and normalizing。

Heat treatment tube quenching furnace

5、Heat treatment tube quenching furnace price concessions

The Heat treatment tube quenching furnace price is introduced as follows:

1. deploy

Usually, the quotation of Heat treatment tube quenching furnace changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

2. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Heat treatment tube quenching furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Heat treatment tube quenching furnace price can meet the purchasing needs of customers.

3. Reasonable sales model

One-combustion energy saving Heat treatment tube quenching furnace manufacturer is a large enterprise specializing in the production and manufacture of Heat treatment tube quenching furnace, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Heat treatment tube quenching furnace price is also low.

4. Model specification

The same type of equipment, with different models and sizes, has different investment costs, so the quotations to customers are naturally different. Generally speaking, the larger the model, the higher the price, and the smaller the model, the lower the price.

5. regional advantages

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving the site is located at:Shandong(Province), where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

Heat treatment tube quenching furnace

6、Company preferential activities

Heat treatment tube quenching furnace is a new type of heating furnace introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for building materials and other industries. Now consult Heat treatment tube quenching furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Heat treatment tube quenching furnaceit has the functions of temper, heat treatment, anneal, Casting heating and Forging heating，it is mainly composed of Radiation chamber, ventilation system, furnace chamber, ventilation system and convection chamber，It is a forging heating device using gas as fuel.。