Introduction to High temperature tube quenching furnace, Forging furnace advantages, characteristics and principles

High temperature tube quenching furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

1、Brief introduction of High temperature tube quenching furnace

High temperature tube quenching furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Strong adaptability,Easy to maintain,energy saving and environmental protection,Easy to maintain,Stable and reliable，Mainly used forImprove production efficiency,Metal melting and casting,Metal forging heating,Metal tempering andMetal heat treatment，it is an ideal choice for customers to buy High temperature tube quenching furnace。

High temperature tube quenching furnace

2、High temperature tube quenching furnace application

High temperature tube quenching furnaces have the following purposes.

1. Energy conservation and environmental protection

The High temperature tube quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the High temperature tube quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of High temperature tube quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal tempering

By properly heating and cooling the metal material, the High temperature tube quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal heat treatment

In addition to forging heating, High temperature tube quenching furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

High temperature tube quenching furnace

3、High temperature tube quenching furnace performance advantage

The advantages of High temperature tube quenching furnace are as follows:

1. Improve product quality

Because the High temperature tube quenching furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Rapid temperature rise

The High temperature tube quenching furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. Multiple fuel options

Although the High temperature tube quenching furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. easy to operate

The operation interface of the High temperature tube quenching furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Efficient combustion

The High temperature tube quenching furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

High temperature tube quenching furnace

4、Advantages of High temperature tube quenching furnace principle

High temperature tube quenching furnaceat work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，structure mainly includes: ventilation system, combustor, convection chamber, recovery of waste heat, Radiation chamber and so on，High temperature tube quenching furnaceSimple structure and advanced technology.，it has the functions of quench, hardening and tempering, normalizing, Casting heating and temper，Widely used inImprove production efficiency,Energy conservation and environmental protection,Improve production efficiency,Metal melting and casting,Metal heat treatment and so on，features include energy saving and environmental protection, Easy to control, Strong adaptability, energy-efficient and Strong adaptability。

High temperature tube quenching furnace

5、Video analysis of High temperature tube quenching furnace

On-site aerial photography of High temperature tube quenching furnace。

High temperature tube quenching furnace

As you can see from the live video.，One-combustion energy saving The overall structural design is simple, diverse and beautiful.，it has the structure of convection chamber, ventilation system, furnace chamber, recovery of waste heat and combustor。

High temperature tube quenching furnaceUniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，It is a forging heating device using gas as fuel.。