What is a Cylindrical tube heating furnace? Forging furnace specifications, models, and parameters

Cylindrical tube heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，modern technology，favorable price。

1、Brief introduction of Cylindrical tube heating furnace

Cylindrical tube heating furnaceIt is a forging heating device using gas as fuel.。

Cylindrical tube heating furnace

2、Cylindrical tube heating furnace principle

Cylindrical tube heating furnaceHeat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

Cylindrical tube heating furnace

3、Physical picture of Cylindrical tube heating furnace

The finished products of the Cylindrical tube heating furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Cylindrical tube heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Cylindrical tube heating furnace function

Cylindrical tube heating furnaceit has the functions of hardening and tempering, hardening and tempering, normalizing, Casting heating and Forging heating，Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，It has a wide range of uses, and is often used inMetal forging heating,Improve production efficiency,Metal tempering,Energy conservation and environmental protection,Metal melting and casting and so on，usually used in heat treatment, petroleum, pharmacy, building materials, electron and other fields，the principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

Cylindrical tube heating furnace

5、Cylindrical tube heating furnace advantage

The advantages of Cylindrical tube heating furnace are as follows:

1. Intelligent control

The Cylindrical tube heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Improve product quality

Because the Cylindrical tube heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Extend the service life of equipment

The Cylindrical tube heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Wide application range

The Cylindrical tube heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Cylindrical tube heating furnace

6、One-combustion energy saving workshop real shot

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Cylindrical tube heating furnacet operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Cylindrical tube heating furnace

As you can see from the live video.One-combustion energy saving the product looks beautiful.。

Cylindrical tube heating furnacemultifunctional, with functions such as quench, anneal, temper, heat treatment and hardening and tempering，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。