Introduction to Gas tube quenching furnace, Forging furnace specifications, model parameters

Gas tube quenching furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is carefully developed by One-combustion energy saving combined with advanced technology。

1、Brief introduction of Gas tube quenching furnace

Gas tube quenching furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has the functions of normalizing, heat treatment, hardening and tempering, Forging heating and quench，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，be loved by our customers.。

Gas tube quenching furnace

2、Gas tube quenching furnace advantage

The advantages of Gas tube quenching furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. easy to operate

The operation interface of the Gas tube quenching furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Improve product quality

Because the Gas tube quenching furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Multiple fuel options

Although the Gas tube quenching furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Wide application range

The Gas tube quenching furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Gas tube quenching furnace

3、Gas tube quenching furnace characteristics

The Gas tube quenching furnace features are as follows:

1. Strong adaptability

The Gas tube quenching furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Stable and reliable

The Gas tube quenching furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Efficient heating

The Gas tube quenching furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to maintain

The structural design of the Gas tube quenching furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Gas tube quenching furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Gas tube quenching furnace

4、Gas tube quenching furnace function

Gas tube quenching furnacemultifunctional, with functions such as Casting heating, normalizing, Casting heating, hardening and tempering and anneal，Mainly used forImprove production efficiency,Metal heat treatment,Energy conservation and environmental protection,Metal melting and casting andMetal heat treatment，the product looks beautiful.，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Gas tube quenching furnace

5、Working principle of Gas tube quenching furnace

Gas tube quenching furnaceHeat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

Gas tube quenching furnace

6、Gas tube quenching furnace explanation video

Speak directly with facts on the spot。

Gas tube quenching furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd at runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

Gas tube quenching furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the main features are Stable and reliable, Strong adaptability, Easy to maintain, Easy to maintain and Strong adaptability。