Introduction to Natural gas tube annealing furnace, forging furnace advantages, characteristics and principles

Natural gas tube annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.。The following is to introduce the Natural gas tube annealing furnace:

1、Brief introduction of Natural gas tube annealing furnace

Natural gas tube annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，at the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，Commonly used inImprove production efficiency,Metal heat treatment,Energy conservation and environmental protection,Metal forging heating,Metal melting and casting and so on，it can be used in heat treatment, petroleum, machinery, Machinery manufacturing, material and other industries，is a kind of Natural gas tube annealing furnace manufactured by One-combustion energy saving。

Natural gas tube annealing furnace

2、Natural gas tube annealing furnace structure

The Natural gas tube annealing furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Natural gas tube annealing furnace

3、Natural gas tube annealing furnace function

Natural gas tube annealing furnacemultifunctional, with functions such as temper, normalizing, heat treatment, Forging heating and hardening and tempering，is a kind of high quality and low price Natural gas tube annealing furnace，customizable。

Natural gas tube annealing furnace

4、Introduction of Natural gas tube annealing furnace characteristics

Natural gas tube annealing furnace has the following characteristics

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Strong adaptability

The Natural gas tube annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Easy to control

The combustion system and ventilation system of the Natural gas tube annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Efficient heating

The Natural gas tube annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Easy to maintain

The structural design of the Natural gas tube annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Natural gas tube annealing furnace

5、Functional advantages of Natural gas tube annealing furnace

Natural gas tube annealing furnaces have the following advantages.

1. Multiple fuel options

Although the Natural gas tube annealing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Intelligent control

The Natural gas tube annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Wide application range

The Natural gas tube annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Improve product quality

Because the Natural gas tube annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Natural gas tube annealing furnace

Natural gas tube annealing furnacewidely used inwar industry,automobile,heat treatment,aerospace,electron and other industries，it has the functions of anneal, quench, Forging heating, hardening and tempering and temper，features include Easy to maintain, Strong adaptability, Easy to control, Stable and reliable and energy-efficient。