Introduction to Regenerative gas tube annealing furnace, how much is the price of the heating furnace?

Regenerative gas tube annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is a Regenerative gas tube annealing furnace，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，favorable price。The following is to introduce the Regenerative gas tube annealing furnace:

1、Brief introduction of Regenerative gas tube annealing furnace

Regenerative gas tube annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，It can be used for Metal forging heating, Improve production efficiency, Metal forging heating, Metal tempering, Energy conservation and environmental protection, Metal heat treatment and so on，the product looks beautiful.，is designed by One-combustion energy saving with advanced technology。

Regenerative gas tube annealing furnace

2、Regenerative gas tube annealing furnace function

Regenerative gas tube annealing furnacemultifunctional, with functions such as hardening and tempering, heat treatment, Forging heating, Casting heating and quench，the product looks beautiful.，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Regenerative gas tube annealing furnace

3、Regenerative gas tube annealing furnace structure composition

The Regenerative gas tube annealing furnace has the following structure

1. furnace chamber

A space for holding metallic materials for heating.

2. Radiation chamber

The heat load of the main place for Regenerative gas tube annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Regenerative gas tube annealing furnace

4、Regenerative gas tube annealing furnace explanation video

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Regenerative gas tube annealing furnace

As you can see from the live video.，One-combustion energy saving the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.。

5、Regenerative gas tube annealing furnace application

Regenerative gas tube annealing furnaces have the following purposes.

1. Energy conservation and environmental protection

The Regenerative gas tube annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Improve production efficiency

The Regenerative gas tube annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal heat treatment

In addition to forging heating, Regenerative gas tube annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal forging heating

The Regenerative gas tube annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative gas tube annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Regenerative gas tube annealing furnace

6、One-combustion energy saving service

Our company can provide you with all-round, high-quality and professional services, especially in after-sales service, which has been unanimously recognized and favored by our customers.。

One-combustion energy saving

Regenerative gas tube annealing furnaceit is widely used in automobile, building materials, surface treatment, Machinery manufacturing, petroleum and other industries，at the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it has the characteristics of energy-efficient, Easy to maintain, Stable and reliable, energy saving and environmental protection and Easy to control。