Introduction to Environmentally friendly tubular quenching furnace, advantages, characteristics and principles of heating furnace

Environmentally friendly tubular quenching furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Cheap and high quality。

1、Brief introduction of Environmentally friendly tubular quenching furnace

Environmentally friendly tubular quenching furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is carefully developed by One-combustion energy saving combined with advanced technology。

Environmentally friendly tubular quenching furnace

2、Introduction of advantages of Environmentally friendly tubular quenching furnace

The advantages of Environmentally friendly tubular quenching furnace are as follows:

1. Extend the service life of equipment

The Environmentally friendly tubular quenching furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Efficient combustion

The Environmentally friendly tubular quenching furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Multiple fuel options

Although the Environmentally friendly tubular quenching furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. easy to operate

The operation interface of the Environmentally friendly tubular quenching furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Improve product quality

Because the Environmentally friendly tubular quenching furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Environmentally friendly tubular quenching furnace

3、Introduction of Environmentally friendly tubular quenching furnace characteristics

Environmentally friendly tubular quenching furnace has the following characteristics

1. Easy to maintain

The structural design of the Environmentally friendly tubular quenching furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Stable and reliable

The Environmentally friendly tubular quenching furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Efficient heating

The Environmentally friendly tubular quenching furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Environmentally friendly tubular quenching furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Environmentally friendly tubular quenching furnace

4、Environmentally friendly tubular quenching furnace field real shot

High-definition picture display of Environmentally friendly tubular quenching furnace, excellent material selection, reliable quality and trustworthy.。

Environmentally friendly tubular quenching furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Environmentally friendly tubular quenching furnace use

The purpose of Environmentally friendly tubular quenching furnace is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Environmentally friendly tubular quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Energy conservation and environmental protection

The Environmentally friendly tubular quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal tempering

By properly heating and cooling the metal material, the Environmentally friendly tubular quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, Environmentally friendly tubular quenching furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal forging heating

The Environmentally friendly tubular quenching furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Environmentally friendly tubular quenching furnace

6、Brief introduction of Environmentally friendly tubular quenching furnace

Environmentally friendly tubular quenching furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is usually composed of furnace chamber, Radiation chamber, combustor, recovery of waste heat and ventilation system，Environmentally friendly tubular quenching furnaceSimple structure and advanced technology.，in the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，was developed and designed by One-combustion energy saving。

Environmentally friendly tubular quenching furnace

Environmentally friendly tubular quenching furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks atmospheric.。