What is a Energy saving and environmentally friendly tubular annealing furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Energy saving and environmentally friendly tubular annealing furnaceIt is a forging heating device using gas as fuel.，is a common Energy saving and environmentally friendly tubular annealing furnace，Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，has been favored by more and more customers.。

1、Brief introduction of Energy saving and environmentally friendly tubular annealing furnace

Energy saving and environmentally friendly tubular annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，widely used in metallurgy, pharmacy, Machinery manufacturing, chemical industry, building materials and other fields，It has a wide range of uses, including Metal forging heating, Metal melting and casting, Metal heat treatment, Metal forging heating and Energy conservation and environmental protection，it has the characteristics of Strong adaptability, energy saving and environmental protection, energy saving and environmental protection, Stable and reliable and Strong adaptability，The price is low and affordable。

Energy saving and environmentally friendly tubular annealing furnace

2、Energy saving and environmentally friendly tubular annealing furnace performance advantage

The advantages of Energy saving and environmentally friendly tubular annealing furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Efficient combustion

The Energy saving and environmentally friendly tubular annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Rapid temperature rise

The Energy saving and environmentally friendly tubular annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Multiple fuel options

Although the Energy saving and environmentally friendly tubular annealing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Intelligent control

The Energy saving and environmentally friendly tubular annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Energy saving and environmentally friendly tubular annealing furnace

3、Energy saving and environmentally friendly tubular annealing furnace use

The purpose of Energy saving and environmentally friendly tubular annealing furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Energy saving and environmentally friendly tubular annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal forging heating

The Energy saving and environmentally friendly tubular annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal heat treatment

In addition to forging heating, Energy saving and environmentally friendly tubular annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Improve production efficiency

The Energy saving and environmentally friendly tubular annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Energy saving and environmentally friendly tubular annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Energy saving and environmentally friendly tubular annealing furnace

4、Energy saving and environmentally friendly tubular annealing furnace structure

The Energy saving and environmentally friendly tubular annealing furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. furnace chamber

A space for holding metallic materials for heating.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Energy saving and environmentally friendly tubular annealing furnace

5、Energy saving and environmentally friendly tubular annealing furnace advantage

The advantages of Energy saving and environmentally friendly tubular annealing furnace are as follows:

1. Rapid temperature rise

The Energy saving and environmentally friendly tubular annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Efficient combustion

The Energy saving and environmentally friendly tubular annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Improve product quality

Because the Energy saving and environmentally friendly tubular annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Energy saving and environmentally friendly tubular annealing furnace can significantly reduce energy consumption, thus reducing operating costs.

Energy saving and environmentally friendly tubular annealing furnace

6、Energy saving and environmentally friendly tubular annealing furnace principle

Energy saving and environmentally friendly tubular annealing furnaceat work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the product looks atmospheric.。

Energy saving and environmentally friendly tubular annealing furnace

Energy saving and environmentally friendly tubular annealing furnacethe main features are Easy to maintain, Easy to control, energy-efficient, energy saving and environmental protection and Easy to maintain，it is mainly composed of ventilation system, Radiation chamber, ventilation system, recovery of waste heat and convection chamber，Energy saving and environmentally friendly tubular annealing furnaceThe structural design is simple, novel and special.。