What is a Large scale through furnace? Introduction to the advantages, characteristics, and principles of the heating furnace

Large scale through furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it has the functions of Forging heating, heat treatment, Casting heating, temper and quench，it can be used in petroleum, surface treatment, heat treatment, war industry, automobile and other industries，has been favored by more and more customers.。The following is to introduce the Large scale through furnace:

1、Brief introduction of Large scale through furnace

Large scale through furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a common Large scale through furnace，support customization。

Large scale through furnace

2、Large scale through furnace working site

The following is the live video of Large scale through furnace designed and produced by One-combustion energy saving for users, from which we can see the The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality. of One-combustion energy savingproduce的Large scale through furnace.。

Large scale through furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

3、Large scale through furnace function

Large scale through furnaceit has the functions of hardening and tempering, heat treatment, anneal, normalizing and Casting heating，it is mainly composed of ventilation system, furnace chamber, recovery of waste heat, convection chamber and Radiation chamber，Large scale through furnaceSimple structure and advanced technology.，Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，the product looks atmospheric.。

Large scale through furnace

4、Large scale through furnace use

The purpose of Large scale through furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Large scale through furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Large scale through furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Energy conservation and environmental protection

The Large scale through furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal forging heating

The Large scale through furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal heat treatment

In addition to forging heating, Large scale through furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Large scale through furnace

5、Structural characteristics of Large scale through furnace

The Large scale through furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. Radiation chamber

The heat load of the main place for Large scale through furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Large scale through furnace

6、Large scale through furnace characteristics

The Large scale through furnace features are as follows:

1. Efficient heating

The Large scale through furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Stable and reliable

The Large scale through furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Large scale through furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

5. Strong adaptability

The Large scale through furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Large scale through furnace

Large scale through furnacethe principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the product looks beautiful.，it is mainly composed of recovery of waste heat, ventilation system, Radiation chamber, furnace chamber and ventilation system。