Introduction to Energy saving and environmentally friendly continuous forging furnace, introduction to forging furnace advantages and characteristics

Energy saving and environmentally friendly continuous forging furnaceIt is a forging heating device using gas as fuel.，it can be used in petroleum, surface treatment, electron, Household necessities, material and other industries，is a Energy saving and environmentally friendly continuous forging furnace newly developed by One-combustion energy saving。

1、Brief introduction of Energy saving and environmentally friendly continuous forging furnace

Energy saving and environmentally friendly continuous forging furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it has the characteristics of Stable and reliable, energy saving and environmental protection, energy-efficient, Easy to maintain and Stable and reliable，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，the product looks beautiful.，was developed and designed by One-combustion energy saving。

Energy saving and environmentally friendly continuous forging furnace

2、Energy saving and environmentally friendly continuous forging furnace performance advantage

Energy saving and environmentally friendly continuous forging furnaces have the following advantages.

1. Wide application range

The Energy saving and environmentally friendly continuous forging furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Multiple fuel options

Although the Energy saving and environmentally friendly continuous forging furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Extend the service life of equipment

The Energy saving and environmentally friendly continuous forging furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Energy saving and environmentally friendly continuous forging furnace can significantly reduce energy consumption, thus reducing operating costs.

Energy saving and environmentally friendly continuous forging furnace

3、Working principle of Energy saving and environmentally friendly continuous forging furnace

Energy saving and environmentally friendly continuous forging furnaceat work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，Structure consists of furnace chamber, convection chamber, ventilation system, ventilation system, Radiation chamber and so on，features include energy saving and environmental protection, Easy to control, Easy to maintain, Strong adaptability and energy-efficient，the product looks atmospheric.，is a common Energy saving and environmentally friendly continuous forging furnace。

Energy saving and environmentally friendly continuous forging furnace

4、Structural advantages of Energy saving and environmentally friendly continuous forging furnace

The Energy saving and environmentally friendly continuous forging furnace has the following structure

1. Radiation chamber

The heat load of the main place for Energy saving and environmentally friendly continuous forging furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. Radiation chamber

The heat load of the main place for Energy saving and environmentally friendly continuous forging furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Energy saving and environmentally friendly continuous forging furnace

5、Video analysis of Energy saving and environmentally friendly continuous forging furnace

The following is the live video of Energy saving and environmentally friendly continuous forging furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace. of One-combustion energy savingEnergy saving and environmentally friendly continuous forging furnace.。

Energy saving and environmentally friendly continuous forging furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the product looks atmospheric.。

6、Energy saving and environmentally friendly continuous forging furnace price advantage

The Energy saving and environmentally friendly continuous forging furnace price is introduced as follows:

1. quality factor

The selling price of excellent quality products is also high, so customers should also consider the quality and price of products comprehensively in the process of purchasing products, so as to buy products with high cost performance.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Energy saving and environmentally friendly continuous forging furnace have more or less differences in price.

3. market quotation

The amount of customers' demand for Energy saving and environmentally friendly continuous forging furnace in the market also has a great influence on the price. When there are many customers purchasing this product in the market and the supply quantity of manufacturers is small, the Energy saving and environmentally friendly continuous forging furnace price will be very high. On the contrary, when fewer customers purchase this product, there will be a phenomenon of oversupply, and the price of Energy saving and environmentally friendly continuous forging furnace will naturally be reduced.

4. regional difference

One-combustion energy savingJinan, Shandong province, the transportation is convenient, and the corresponding cost of transporting Energy saving and environmentally friendly continuous forging furnace is low, which reduces the cost of selling Energy saving and environmentally friendly continuous forging furnace by manufacturers, and the price will also decrease.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Energy saving and environmentally friendly continuous forging furnace

Energy saving and environmentally friendly continuous forging furnaceThe structure is novel, special, advanced, reasonable and scientific.，structure mainly includes: furnace chamber, ventilation system, recovery of waste heat, Radiation chamber, combustor and so on，at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。