Introduction to Trolley mold heating furnace, heating furnace advantages, characteristics and principles

Trolley mold heating furnaceIt is a forging heating device using gas as fuel.，Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，is a kind of high quality and low price Trolley mold heating furnace，the main features are Easy to maintain, energy saving and environmental protection, Easy to maintain, Easy to control and energy saving and environmental protection，in the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。The following is to introduce the Trolley mold heating furnace:

1、Brief introduction of Trolley mold heating furnace

Trolley mold heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the product looks beautiful.，it is mainly composed of ventilation system, Radiation chamber, recovery of waste heat, ventilation system and combustor，is developed and improved by One-combustion energy saving。

Trolley mold heating furnace

2、Trolley mold heating furnace function

Trolley mold heating furnaceit has the functions of Casting heating, temper, quench, heat treatment and anneal，features include Stable and reliable, Strong adaptability, energy-efficient, energy saving and environmental protection and energy-efficient，it has the characteristics of Easy to maintain, Easy to control, Strong adaptability, Stable and reliable and energy saving and environmental protection，widely used in aerospace, chemical industry, Machinery manufacturing, electron, metallurgy and other fields，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。

Trolley mold heating furnace

3、Trolley mold heating furnace function

Trolley mold heating furnacemultifunctional, with functions such as hardening and tempering, quench, temper, anneal and Forging heating，It has a wide range of uses, including Metal melting and casting, Improve production efficiency, Metal heat treatment, Metal forging heating and Energy conservation and environmental protection，is a Trolley mold heating furnace。

Trolley mold heating furnace

4、Trolley mold heating furnace structure

The Trolley mold heating furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. furnace chamber

A space for holding metallic materials for heating.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Trolley mold heating furnace

5、Introduction of Trolley mold heating furnace characteristics

Trolley mold heating furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Stable and reliable

The Trolley mold heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Easy to maintain

The structural design of the Trolley mold heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Efficient heating

The Trolley mold heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. Strong adaptability

The Trolley mold heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Trolley mold heating furnace

6、Advantages of Trolley mold heating furnace principle

Trolley mold heating furnaceat work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it is an ideal choice for customers to buy Trolley mold heating furnace。

Trolley mold heating furnace

Trolley mold heating furnaceCommonly used inImprove production efficiency,Metal tempering,Energy conservation and environmental protection,Metal melting and casting,Metal forging heating and so on，it has the functions of normalizing, heat treatment, Casting heating, hardening and tempering and quench，The overall structural design is relatively simple and compact.，it has the structure of furnace chamber, ventilation system, convection chamber, Radiation chamber and ventilation system。