Introduction to Trolley type rapid quenching furnace and forging furnace structure principle

Trolley type rapid quenching furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，in the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，It is mostly used in Energy conservation and environmental protection, Metal heat treatment, Metal forging heating, Improve production efficiency, Metal tempering, Metal melting and casting and so on，has been favored by more and more customers.。The following is to introduce the Trolley type rapid quenching furnace:

1、Brief introduction of Trolley type rapid quenching furnace

Trolley type rapid quenching furnaceIt is a forging heating device using gas as fuel.，it is widely used inHousehold necessities,aerospace,material,light industry,surface treatment and other industries，is a common Trolley type rapid quenching furnace，it has the functions of quench, Forging heating, Casting heating, temper and anneal，customizable。

Trolley type rapid quenching furnace

2、Trolley type rapid quenching furnace function

Trolley type rapid quenching furnacemultifunctional, with functions such as heat treatment, normalizing, hardening and tempering, quench and normalizing，It has a wide range of uses, including Improve production efficiency, Metal heat treatment, Metal forging heating, Energy conservation and environmental protection and Metal tempering，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.。

Trolley type rapid quenching furnace

3、Trolley type rapid quenching furnace characteristics

The Trolley type rapid quenching furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the Trolley type rapid quenching furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Easy to maintain

The structural design of the Trolley type rapid quenching furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Trolley type rapid quenching furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Stable and reliable

The Trolley type rapid quenching furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Trolley type rapid quenching furnace

4、Trolley type rapid quenching furnace use

The purpose of Trolley type rapid quenching furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Trolley type rapid quenching furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Energy conservation and environmental protection

The Trolley type rapid quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal tempering

By properly heating and cooling the metal material, the Trolley type rapid quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal forging heating

The Trolley type rapid quenching furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Energy conservation and environmental protection

The Trolley type rapid quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Trolley type rapid quenching furnace

5、Trolley type rapid quenching furnace principle

Trolley type rapid quenching furnaceat work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is a popular Trolley type rapid quenching furnace，widely used in heat treatment, petroleum, machinery, shipping, Machinery manufacturing and other fields。

Trolley type rapid quenching furnace

6、High-definition map of One-combustion energy saving workshop

The finished products of the Trolley type rapid quenching furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Trolley type rapid quenching furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Trolley type rapid quenching furnaceit has the functions of temper, Casting heating, anneal, heat treatment and Forging heating，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。