Introduction to Trolley type low-temperature heating furnace, how much is the price of the forging furnace?

Trolley type low-temperature heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

1、Brief introduction of Trolley type low-temperature heating furnace

Trolley type low-temperature heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，was developed and designed by One-combustion energy saving。

Trolley type low-temperature heating furnace

2、Introduction of Trolley type low-temperature heating furnace characteristics

Trolley type low-temperature heating furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Strong adaptability

The Trolley type low-temperature heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Easy to maintain

The structural design of the Trolley type low-temperature heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Stable and reliable

The Trolley type low-temperature heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Trolley type low-temperature heating furnace

3、Working principle of Trolley type low-temperature heating furnace

Trolley type low-temperature heating furnacethe principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，the main structure includes recovery of waste heat, convection chamber, ventilation system, furnace chamber and ventilation system，support customization。

Trolley type low-temperature heating furnace

4、Trolley type low-temperature heating furnace application

Trolley type low-temperature heating furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Trolley type low-temperature heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal forging heating

The Trolley type low-temperature heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Trolley type low-temperature heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal heat treatment

In addition to forging heating, Trolley type low-temperature heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Energy conservation and environmental protection

The Trolley type low-temperature heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Trolley type low-temperature heating furnace

5、Structural characteristics of Trolley type low-temperature heating furnace

The Trolley type low-temperature heating furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Radiation chamber

The heat load of the main place for Trolley type low-temperature heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Trolley type low-temperature heating furnace

6、Trolley type low-temperature heating furnace price concessions

The Trolley type low-temperature heating furnace price is introduced as follows:

1. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Trolley type low-temperature heating furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Trolley type low-temperature heating furnace price can meet the purchasing needs of customers.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

4. mass discrepancy

If the quality of the product is guaranteed, its service life will be longer. At the same time, the more perfect the performance, the more economic value can be created for customers, and the price of such products will be higher. One-combustion energy saving has strictly controlled the quality and the sales price is also reasonable.

5. cost of production

If the cost of the product is high, the selling price of the product will be high, so the cost input is an important factor that causes the price change of the Trolley type low-temperature heating furnace.

Trolley type low-temperature heating furnace

Trolley type low-temperature heating furnacein the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。