What is a Dual car high-temperature furnace? Introduction to the principle of forging furnace structure

Dual car high-temperature furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a Dual car high-temperature furnace，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。The following is to introduce the Dual car high-temperature furnace:

1、Brief introduction of Dual car high-temperature furnace

Dual car high-temperature furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it can be used in war industry, chemical industry, light industry, pharmacy, electron and other industries，The price is low and affordable，modern technology。

Dual car high-temperature furnace

2、Dual car high-temperature furnace characteristics

The Dual car high-temperature furnace features are as follows:

1. Efficient heating

The Dual car high-temperature furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Easy to control

The combustion system and ventilation system of the Dual car high-temperature furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Strong adaptability

The Dual car high-temperature furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Easy to maintain

The structural design of the Dual car high-temperature furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Dual car high-temperature furnace

3、Dual car high-temperature furnace HD picture

Provide high-definition Dual car high-temperature furnace real shot, a variety of specifications and models for customers to visit.。

Dual car high-temperature furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Dual car high-temperature furnace use

The purpose of Dual car high-temperature furnace is introduced as follows:

1. Metal forging heating

The Dual car high-temperature furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal tempering

By properly heating and cooling the metal material, the Dual car high-temperature furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Dual car high-temperature furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Improve production efficiency

The Dual car high-temperature furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Dual car high-temperature furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Dual car high-temperature furnace

5、Dual car high-temperature furnace advantage

The advantages of Dual car high-temperature furnace are as follows:

1. Rapid temperature rise

The Dual car high-temperature furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. easy to operate

The operation interface of the Dual car high-temperature furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Rapid temperature rise

The Dual car high-temperature furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Wide application range

The Dual car high-temperature furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Extend the service life of equipment

The Dual car high-temperature furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Dual car high-temperature furnace

Dual car high-temperature furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the product looks beautiful.，is a Dual car high-temperature furnace。