Introduction to Dual car high-temperature test furnace, how much is the price of the heating furnace?

Dual car high-temperature test furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

1、Brief introduction of Dual car high-temperature test furnace

Dual car high-temperature test furnaceIt is a forging heating device using gas as fuel.，the product looks atmospheric.。

Dual car high-temperature test furnace

2、Dual car high-temperature test furnace field real shot

You can buy Dual car high-temperature test furnace according to your needs and show you Dual car high-temperature test furnace videos.。

Dual car high-temperature test furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the main structure includes ventilation system, ventilation system, recovery of waste heat, ventilation system and convection chamber。

3、Physical picture of Dual car high-temperature test furnace

Dual car high-temperature test furnace specifications and models, novel design, beautiful appearance, for our customers to visit.。

Dual car high-temperature test furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Dual car high-temperature test furnace advantage

The advantages of Dual car high-temperature test furnace are as follows:

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the Dual car high-temperature test furnace can significantly reduce energy consumption, thus reducing operating costs.

2. Uniform heating

The Dual car high-temperature test furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Rapid temperature rise

The Dual car high-temperature test furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Intelligent control

The Dual car high-temperature test furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Dual car high-temperature test furnace

5、Structural advantages of Dual car high-temperature test furnace

The Dual car high-temperature test furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Radiation chamber

The heat load of the main place for Dual car high-temperature test furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Dual car high-temperature test furnace

6、Dual car high-temperature test furnace use

The purpose of Dual car high-temperature test furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Dual car high-temperature test furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The Dual car high-temperature test furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The Dual car high-temperature test furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Dual car high-temperature test furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal tempering

By properly heating and cooling the metal material, the Dual car high-temperature test furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Dual car high-temperature test furnace

Dual car high-temperature test furnaceat work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，widely used inmetallurgy,war industry,aerospace,pharmacy,machinery and other industries。