Introduction to Double door natural gas trolley furnace, Forging furnace specifications, model parameters

Double door natural gas trolley furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。

1、Brief introduction of Double door natural gas trolley furnace

Double door natural gas trolley furnaceIt is a forging heating device using gas as fuel.，Commonly used inImprove production efficiency,Energy conservation and environmental protection,Improve production efficiency,Metal tempering,Metal heat treatment and so on，favorable price，reliable quality。

Double door natural gas trolley furnace

2、Double door natural gas trolley furnace HD real shot

Exquisite design, excellent material selection, reliable quality and high-definition pictures for our customers to visit.。

Double door natural gas trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Double door natural gas trolley furnace use

The purpose of Double door natural gas trolley furnace is introduced as follows:

1. Energy conservation and environmental protection

The Double door natural gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal heat treatment

In addition to forging heating, Double door natural gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Double door natural gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal tempering

By properly heating and cooling the metal material, the Double door natural gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal forging heating

The Double door natural gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Double door natural gas trolley furnace

4、Working principle of Double door natural gas trolley furnace

Double door natural gas trolley furnaceat the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，Easy to control,energy saving and environmental protection,Strong adaptability,Easy to maintain,energy-efficient，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，The structural design is more advanced and reasonable.，generally, it is composed of Radiation chamber, ventilation system, convection chamber, ventilation system, combustor and other major components。

Double door natural gas trolley furnace

5、Double door natural gas trolley furnace introduction video

You can buy Double door natural gas trolley furnace according to your needs and show you Double door natural gas trolley furnace videos.。

Double door natural gas trolley furnace

As you can see from the live video.，One-combustion energy saving It has the functions of Metal forging heating, Energy conservation and environmental protection, Metal melting and casting, Metal heat treatment and Metal tempering。

6、One-combustion energy saving workshop picture real shot

The finished products of the Double door natural gas trolley furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Double door natural gas trolley furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Double door natural gas trolley furnaceit has the functions of anneal, temper, hardening and tempering, heat treatment and Casting heating，is a kind of high quality and low price Double door natural gas trolley furnace。