Introduction to Well type natural gas trolley furnace and heating furnace working principle

Well type natural gas trolley furnaceIt is a forging heating device using gas as fuel.，The structural design is more advanced and reasonable.，it is mainly composed of combustor, ventilation system, ventilation system, convection chamber and recovery of waste heat，is carefully developed by One-combustion energy saving combined with advanced technology。The following is to introduce the Well type natural gas trolley furnace:

1、Brief introduction of Well type natural gas trolley furnace

Well type natural gas trolley furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，is a Well type natural gas trolley furnace，features include Strong adaptability, Easy to control, Easy to maintain, energy saving and environmental protection and Strong adaptability，it is usually composed of Radiation chamber, furnace chamber, furnace chamber, ventilation system and convection chamber，productSimple structure and advanced technology.。

Well type natural gas trolley furnace

2、Well type natural gas trolley furnace performance advantage

The advantages of Well type natural gas trolley furnace are as follows:

1. Extend the service life of equipment

The Well type natural gas trolley furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Multiple fuel options

Although the Well type natural gas trolley furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Intelligent control

The Well type natural gas trolley furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Rapid temperature rise

The Well type natural gas trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Wide application range

The Well type natural gas trolley furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Well type natural gas trolley furnace

3、Well type natural gas trolley furnace characteristics

The Well type natural gas trolley furnace features are as follows:

1. Efficient heating

The Well type natural gas trolley furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Easy to maintain

The structural design of the Well type natural gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Well type natural gas trolley furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Strong adaptability

The Well type natural gas trolley furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Stable and reliable

The Well type natural gas trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Well type natural gas trolley furnace

4、On-site real shot of Well type natural gas trolley furnace

Various styles and styles of Well type natural gas trolley furnace, complete models, for you to choose at will.。

Well type natural gas trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Well type natural gas trolley furnace function

Well type natural gas trolley furnacemultifunctional, with functions such as Casting heating, hardening and tempering, anneal, Casting heating and normalizing。

Well type natural gas trolley furnace

Well type natural gas trolley furnaceit can be used in building materials, pharmacy, Household necessities, aerospace, material and other industries，it has the functions of quench, heat treatment, temper, Forging heating and hardening and tempering，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。