What is a Low temperature gas trolley furnace? forging furnace specifications, models, and parameters

Low temperature gas trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a Low temperature gas trolley furnace。The following is to introduce the Low temperature gas trolley furnace:

1、Brief introduction of Low temperature gas trolley furnace

Low temperature gas trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the product looks beautiful.，is carefully developed by One-combustion energy saving combined with advanced technology。

Low temperature gas trolley furnace

2、Low temperature gas trolley furnace video live broadcast

On-site aerial photography of Low temperature gas trolley furnace。

Low temperature gas trolley furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

3、Introduction of Low temperature gas trolley furnace characteristics

Low temperature gas trolley furnace has the following characteristics

1. Easy to maintain

The structural design of the Low temperature gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Low temperature gas trolley furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Efficient heating

The Low temperature gas trolley furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Stable and reliable

The Low temperature gas trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Low temperature gas trolley furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Low temperature gas trolley furnace

4、Low temperature gas trolley furnace application

Low temperature gas trolley furnaces have the following purposes.

1. Energy conservation and environmental protection

The Low temperature gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Low temperature gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Improve production efficiency

The Low temperature gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Energy conservation and environmental protection

The Low temperature gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal heat treatment

In addition to forging heating, Low temperature gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Low temperature gas trolley furnace

5、Structural advantages of Low temperature gas trolley furnace

The Low temperature gas trolley furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Low temperature gas trolley furnace

6、One-combustion energy saving's strength

The company has many years of Low temperature gas trolley furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Low temperature gas trolley furnaceStructure consists of combustor, Radiation chamber, convection chamber, combustor, Radiation chamber and so on，It is mostly used in Metal tempering, Metal heat treatment, Metal forging heating, Improve production efficiency, Metal melting and casting, Energy conservation and environmental protection and so on，is a kind of high quality and low price Low temperature gas trolley furnace。