What is a Industrial natural gas trolley furnace? Introduction to the advantages and characteristics of heating furnace functions

Industrial natural gas trolley furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，The structure is novel, special, advanced, reasonable and scientific.，the main structure includes combustor, recovery of waste heat, convection chamber, furnace chamber, ventilation system and so on，at runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it can be used in aerospace, electron, Household necessities, machinery, chemical industry and other industries，Easy to control,energy-efficient,Easy to maintain,energy saving and environmental protection,Easy to maintain。

1、Brief introduction of Industrial natural gas trolley furnace

Industrial natural gas trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a Industrial natural gas trolley furnace newly developed by One-combustion energy saving。

Industrial natural gas trolley furnace

2、Industrial natural gas trolley furnace structure composition

The Industrial natural gas trolley furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. Radiation chamber

The heat load of the main place for Industrial natural gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. furnace chamber

A space for holding metallic materials for heating.

Industrial natural gas trolley furnace

3、Industrial natural gas trolley furnace use

The purpose of Industrial natural gas trolley furnace is introduced as follows:

1. Energy conservation and environmental protection

The Industrial natural gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the Industrial natural gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Improve production efficiency

The Industrial natural gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Industrial natural gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal forging heating

The Industrial natural gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Industrial natural gas trolley furnace

4、Industrial natural gas trolley furnace function

Industrial natural gas trolley furnaceit has the functions of normalizing, anneal, hardening and tempering, Casting heating and quench，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it is mainly composed of convection chamber, recovery of waste heat, ventilation system, combustor and Radiation chamber，productThe overall structural design is relatively simple，reliable quality。

Industrial natural gas trolley furnace

5、Industrial natural gas trolley furnace characteristics

The Industrial natural gas trolley furnace features are as follows:

1. Strong adaptability

The Industrial natural gas trolley furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Industrial natural gas trolley furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Efficient heating

The Industrial natural gas trolley furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to maintain

The structural design of the Industrial natural gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Easy to control

The combustion system and ventilation system of the Industrial natural gas trolley furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Industrial natural gas trolley furnace

6、Industrial natural gas trolley furnace price consultation

The Industrial natural gas trolley furnace price is introduced as follows:

1. region

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving address:Jinan, where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

2. quality factor

Quality is an important and fundamental factor that affects the price of Industrial natural gas trolley furnace. In the final analysis, its price depends on its quality. Usually, Industrial natural gas trolley furnace with better quality will cost more, and such products have better effects, longer service life and more advanced technology. A Industrial natural gas trolley furnace with a relatively general quality will cost less, have a shorter service life and have a relatively general use effect.

3. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Industrial natural gas trolley furnace have more or less differences in price.

4. technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

5. Model type

The same type of products, with different specifications, models and sizes, have different costs, so the quotations to customers naturally vary. Generally speaking, the larger the model, the higher the price, and the smaller the model, the lower the price.

Industrial natural gas trolley furnace

Industrial natural gas trolley furnaceStructure consists of Radiation chamber, ventilation system, furnace chamber, Radiation chamber, ventilation system and so on，It is mostly used in Metal heat treatment, Metal forging heating, Metal heat treatment, Metal tempering, Metal melting and casting, Energy conservation and environmental protection and so on，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.。