What is a Annealing trolley heating furnace? heating furnace specifications, models, and parameters

Annealing trolley heating furnaceIt is a forging heating device using gas as fuel.，the main features are Stable and reliable, energy-efficient, energy saving and environmental protection, Easy to control and energy-efficient，The structure is novel, special, advanced, reasonable and scientific.，it is mainly composed of furnace chamber, ventilation system, convection chamber, Radiation chamber and recovery of waste heat，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，It can be used for Improve production efficiency, Metal tempering, Energy conservation and environmental protection, Metal melting and casting, Metal heat treatment, Energy conservation and environmental protection and so on。

1、Brief introduction of Annealing trolley heating furnace

Annealing trolley heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Annealing trolley heating furnace

2、Working principle of Annealing trolley heating furnace

Annealing trolley heating furnaceHeat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the product looks beautiful.，multifunctional, with functions such as hardening and tempering, heat treatment, hardening and tempering, normalizing and temper，Simple structure and reliable operation.，the main structure includes ventilation system, ventilation system, furnace chamber, combustor, combustor and so on，was developed and designed by One-combustion energy saving。

Annealing trolley heating furnace

3、Functional advantages of Annealing trolley heating furnace

Annealing trolley heating furnaces have the following advantages.

1. Extend the service life of equipment

The Annealing trolley heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Multiple fuel options

Although the Annealing trolley heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Efficient combustion

The Annealing trolley heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Intelligent control

The Annealing trolley heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Improve product quality

Because the Annealing trolley heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Annealing trolley heating furnace

4、Annealing trolley heating furnace use

The purpose of Annealing trolley heating furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Annealing trolley heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal heat treatment

In addition to forging heating, Annealing trolley heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The Annealing trolley heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Improve production efficiency

The Annealing trolley heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal tempering

By properly heating and cooling the metal material, the Annealing trolley heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Annealing trolley heating furnace

5、Structural advantages of Annealing trolley heating furnace

The Annealing trolley heating furnace has the following structure

1. Radiation chamber

The heat load of the main place for Annealing trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. furnace chamber

A space for holding metallic materials for heating.

4. Radiation chamber

The heat load of the main place for Annealing trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Annealing trolley heating furnace

6、Annealing trolley heating furnace price advantage

The Annealing trolley heating furnace price is introduced as follows:

1. market

Market supply and demand is the main objective factor to determine the price, and the imbalance between supply and demand affects the price change. Generally speaking, when the Annealing trolley heating furnace market is in short supply, its price will increase relatively; On the contrary, when the supply exceeds the demand, it also indicates that the competition among manufacturers is fierce. In order to better improve the visibility of manufacturers and occupy a more favorable market position, manufacturers will generally lower their prices appropriately; Only when the market supply and demand reach a balanced state can its normal price be realized.

2. technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

3. Model specification

The same product, even with different specifications and models and different configurations, has different costs, so the price will be different.

4. cost of production

If the cost of the product is high, the selling price of the product will be high, so the cost input is an important factor that causes the price change of the Annealing trolley heating furnace.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Annealing trolley heating furnace

Annealing trolley heating furnacethe product looks atmospheric.，Mainly used forImprove production efficiency,Metal tempering,Metal melting and casting,Metal forging heating andMetal heat treatment。