Introduction to Fully enclosed natural gas trolley furnace, introduction to heating furnace advantages and characteristics

Fully enclosed natural gas trolley furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，it has the characteristics of energy saving and environmental protection, Easy to maintain, Strong adaptability, Stable and reliable and Easy to control，Commonly used inMetal heat treatment,Energy conservation and environmental protection,Improve production efficiency,Metal tempering,Metal melting and casting and so on，The overall structural design is relatively simple，it is mainly composed of Radiation chamber, convection chamber, ventilation system, recovery of waste heat and ventilation system。The following is to introduce the Fully enclosed natural gas trolley furnace:

1、Brief introduction of Fully enclosed natural gas trolley furnace

Fully enclosed natural gas trolley furnaceIt is a forging heating device using gas as fuel.。

Fully enclosed natural gas trolley furnace

2、Advantages of Fully enclosed natural gas trolley furnace principle

Fully enclosed natural gas trolley furnaceat work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，The structural design is more advanced and reasonable.，it is mainly composed of recovery of waste heat, ventilation system, Radiation chamber, convection chamber and furnace chamber，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，the main features are energy-efficient, energy-efficient, energy saving and environmental protection, Easy to control and Stable and reliable，is a common Fully enclosed natural gas trolley furnace。

Fully enclosed natural gas trolley furnace

3、Fully enclosed natural gas trolley furnace advantage

The advantages of Fully enclosed natural gas trolley furnace are as follows:

1. Rapid temperature rise

The Fully enclosed natural gas trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Improve product quality

Because the Fully enclosed natural gas trolley furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Fully enclosed natural gas trolley furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Wide application range

The Fully enclosed natural gas trolley furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Fully enclosed natural gas trolley furnace

4、Fully enclosed natural gas trolley furnace characteristics

The Fully enclosed natural gas trolley furnace features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Efficient heating

The Fully enclosed natural gas trolley furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Stable and reliable

The Fully enclosed natural gas trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Fully enclosed natural gas trolley furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Fully enclosed natural gas trolley furnace

5、Fully enclosed natural gas trolley furnace structure

The Fully enclosed natural gas trolley furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. Radiation chamber

The heat load of the main place for Fully enclosed natural gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Fully enclosed natural gas trolley furnace

6、Fully enclosed natural gas trolley furnace price concessions

The Fully enclosed natural gas trolley furnace price is introduced as follows:

1. product costs

A Fully enclosed natural gas trolley furnace needs to spend a lot of manufacturing costs from research and development to production to sales, including raw material costs, technical costs, labor costs, etc. The higher the manufacturing cost, the higher the price will be.

2. select a qualified person

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

3. mass discrepancy

Generally speaking, the higher the product quality, the higher the Fully enclosed natural gas trolley furnace price. A reasonable balance is made between quality and price, so that the comprehensive quality of the product can meet the customer's use standards and meet the basic needs of customers in terms of price.

4. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Fully enclosed natural gas trolley furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Fully enclosed natural gas trolley furnace price can meet the purchasing needs of customers.

5. technology content

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

Fully enclosed natural gas trolley furnace

Fully enclosed natural gas trolley furnacethe main structure includes Radiation chamber, convection chamber, furnace chamber, combustor, ventilation system and so on，at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，multifunctional, with functions such as anneal, heat treatment, normalizing, heat treatment and Casting heating。