Introduction to Double door dual natural gas trolley furnace and heating furnace working principle

Double door dual natural gas trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。The following is to introduce the Double door dual natural gas trolley furnace:

1、Brief introduction of Double door dual natural gas trolley furnace

Double door dual natural gas trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，multifunctional, with functions such as quench, temper, heat treatment, hardening and tempering and Casting heating。

Double door dual natural gas trolley furnace

2、Double door dual natural gas trolley furnace characteristics

The Double door dual natural gas trolley furnace features are as follows:

1. Easy to maintain

The structural design of the Double door dual natural gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Efficient heating

The Double door dual natural gas trolley furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Strong adaptability

The Double door dual natural gas trolley furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Double door dual natural gas trolley furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Double door dual natural gas trolley furnace

3、Introduction of advantages of Double door dual natural gas trolley furnace

The advantages of Double door dual natural gas trolley furnace are as follows:

1. Rapid temperature rise

The Double door dual natural gas trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Efficient combustion

The Double door dual natural gas trolley furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Wide application range

The Double door dual natural gas trolley furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Extend the service life of equipment

The Double door dual natural gas trolley furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Multiple fuel options

Although the Double door dual natural gas trolley furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Double door dual natural gas trolley furnace

4、Double door dual natural gas trolley furnace use

The purpose of Double door dual natural gas trolley furnace is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Double door dual natural gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Energy conservation and environmental protection

The Double door dual natural gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal heat treatment

In addition to forging heating, Double door dual natural gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the Double door dual natural gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal forging heating

The Double door dual natural gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Double door dual natural gas trolley furnace

5、Structural characteristics of Double door dual natural gas trolley furnace

The Double door dual natural gas trolley furnace has the following structure

1. Radiation chamber

The heat load of the main place for Double door dual natural gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Double door dual natural gas trolley furnace

6、One-combustion energy saving delivery site

On-site aerial photography of Double door dual natural gas trolley furnace。

Double door dual natural gas trolley furnace

As you can see from the live video.One-combustion energy saving at the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

Double door dual natural gas trolley furnacefeatures include Easy to maintain, Strong adaptability, Stable and reliable, energy saving and environmental protection and Stable and reliable，it mainly includes recovery of waste heat, ventilation system, recovery of waste heat, ventilation system and Radiation chamber，productSimple structure and reliable operation.，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。