What is a Heating furnace for trolley in heat treatment workshop? heating furnace specifications, models, and parameters

Heating furnace for trolley in heat treatment workshopIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is designed by One-combustion energy saving with advanced technology。

1、Brief introduction of Heating furnace for trolley in heat treatment workshop

Heating furnace for trolley in heat treatment workshopIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，in the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，be of high quality。

Heating furnace for trolley in heat treatment workshop

2、Heating furnace for trolley in heat treatment workshop use

The purpose of Heating furnace for trolley in heat treatment workshop is introduced as follows:

1. Metal forging heating

The Heating furnace for trolley in heat treatment workshop can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Heating furnace for trolley in heat treatment workshops can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Energy conservation and environmental protection

The Heating furnace for trolley in heat treatment workshop uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal heat treatment

In addition to forging heating, Heating furnace for trolley in heat treatment workshops can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal tempering

By properly heating and cooling the metal material, the Heating furnace for trolley in heat treatment workshop can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Heating furnace for trolley in heat treatment workshop

3、Heating furnace for trolley in heat treatment workshop characteristics

The Heating furnace for trolley in heat treatment workshop features are as follows:

1. Strong adaptability

The Heating furnace for trolley in heat treatment workshop can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Efficient heating

The Heating furnace for trolley in heat treatment workshop can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Easy to control

The combustion system and ventilation system of the Heating furnace for trolley in heat treatment workshop can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Easy to maintain

The structural design of the Heating furnace for trolley in heat treatment workshop is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Heating furnace for trolley in heat treatment workshop

4、Working principle of Heating furnace for trolley in heat treatment workshop

Heating furnace for trolley in heat treatment workshopThe high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

Heating furnace for trolley in heat treatment workshop

5、Heating furnace for trolley in heat treatment workshop function

Heating furnace for trolley in heat treatment workshopit has the functions of anneal, Casting heating, quench, heat treatment and temper。

Heating furnace for trolley in heat treatment workshop

6、Company selection

Choosing a suitable Heating furnace for trolley in heat treatment workshop manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Heating furnace for trolley in heat treatment workshop products that meet the demand and have good cost performance.。

One-combustion energy saving

Heating furnace for trolley in heat treatment workshopIt is a forging heating device using gas as fuel.，It has a wide range of uses, and is often used inMetal heat treatment,Metal forging heating,Metal melting and casting,Energy conservation and environmental protection,Improve production efficiency and so on。