Introduction to Preheating burner trolley heating furnace, how much is the price of the heating furnace?

Preheating burner trolley heating furnaceIt is a forging heating device using gas as fuel.，the main features are Stable and reliable, energy-efficient, energy saving and environmental protection, Strong adaptability and Easy to control。

1、Brief introduction of Preheating burner trolley heating furnace

Preheating burner trolley heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a Preheating burner trolley heating furnace，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，be loved by our customers.。

Preheating burner trolley heating furnace

2、Structural characteristics of Preheating burner trolley heating furnace

The Preheating burner trolley heating furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Preheating burner trolley heating furnace

3、Preheating burner trolley heating furnace HD real shot

Preheating burner trolley heating furnace manufacturer, the product High definition real shot. In order to facilitate new and old customers to find satisfactory the product looks beautiful. more quickly, the following high-definition pictures are provided for reference.。

Preheating burner trolley heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Preheating burner trolley heating furnace use

The purpose of Preheating burner trolley heating furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Preheating burner trolley heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal forging heating

The Preheating burner trolley heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Preheating burner trolley heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The Preheating burner trolley heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Improve production efficiency

The Preheating burner trolley heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Preheating burner trolley heating furnace

5、Preheating burner trolley heating furnace function

Preheating burner trolley heating furnacemultifunctional, with functions such as quench, anneal, heat treatment, Casting heating and normalizing，It is a product series that integrates Energy conservation and environmental protection, Metal tempering, Metal heat treatment, Improve production efficiency and Energy conservation and environmental protection，the product looks atmospheric.，it can be used in pharmacy, Household necessities, light industry, electron, heat treatment and other industries，the main features are Easy to control, Stable and reliable, energy saving and environmental protection, Stable and reliable and Strong adaptability。

Preheating burner trolley heating furnace

6、One-combustion energy saving introduced

One-combustion energy saving, as one of the professional and powerful Preheating burner trolley heating furnace manufacturers in Jinan, produces Preheating burner trolley heating furnace with reliable quality, affordable price and perfect after-sales, which have been successfully practiced in many processing plants at home and abroad.。

One-combustion energy saving

Preheating burner trolley heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Easy to maintain,energy saving and environmental protection,energy-efficient,Strong adaptability,Easy to maintain。