What is a Regenerative burner trolley forging heating furnace? Introduction to the advantages and characteristics of the forging furnace

Regenerative burner trolley forging heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，the product looks beautiful.，be loved by our customers.。The following is to introduce the Regenerative burner trolley forging heating furnace:

1、Brief introduction of Regenerative burner trolley forging heating furnace

Regenerative burner trolley forging heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it has the functions of quench, heat treatment, Casting heating, Forging heating and temper，it is widely used inHousehold necessities,building materials,metallurgy,chemical industry,shipping and other industries。

Regenerative burner trolley forging heating furnace

2、Regenerative burner trolley forging heating furnace function

Regenerative burner trolley forging heating furnaceit has the functions of heat treatment, Casting heating, anneal, temper and quench，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，modern technology。

Regenerative burner trolley forging heating furnace

3、Regenerative burner trolley forging heating furnace use

The purpose of Regenerative burner trolley forging heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The Regenerative burner trolley forging heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Regenerative burner trolley forging heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal tempering

By properly heating and cooling the metal material, the Regenerative burner trolley forging heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Improve production efficiency

The Regenerative burner trolley forging heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Regenerative burner trolley forging heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Regenerative burner trolley forging heating furnace

4、Regenerative burner trolley forging heating furnace principle

Regenerative burner trolley forging heating furnacein the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is an advanced Regenerative burner trolley forging heating furnace developed by our company in combination with the actual situation of the industry。

Regenerative burner trolley forging heating furnace

5、How much is the Regenerative burner trolley forging heating furnace?

The Regenerative burner trolley forging heating furnace price is introduced as follows:

1. technology content

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

2. Manufacturer's strength

At present, there are many manufacturers of products on the market, some of which belong to direct selling manufacturers and some belong to middlemen. Direct selling manufacturers will cost less than middlemen, so the quotation for products will be lower. Therefore, it is recommended that customers buy products from direct selling manufacturers of Regenerative burner trolley forging heating furnace. In addition, even direct selling manufacturers have different capital status, strength level and technology, and the quotation for Regenerative burner trolley forging heating furnace will be different.

3. geographical position

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

4. Reasonable cost

If the cost of the product is high, the selling price of the product will be high, so the cost input is an important factor that causes the price change of the Regenerative burner trolley forging heating furnace.

5. Proper management mode

What kind of sales methods manufacturers have has an intuitive impact on product prices. If it is a direct selling manufacturer, the manufacturer sells directly to customers, and there is no intermediate price difference, which can benefit customers to a greater extent.

Regenerative burner trolley forging heating furnace

6、One-combustion energy saving delivery site

On-site aerial photography of Regenerative burner trolley forging heating furnace。

Regenerative burner trolley forging heating furnace

As you can see from the live video.One-combustion energy saving is a common Regenerative burner trolley forging heating furnace。

Regenerative burner trolley forging heating furnacemultifunctional, with functions such as hardening and tempering, Forging heating, normalizing, heat treatment and temper，the main features are Stable and reliable, Easy to maintain, energy-efficient, Strong adaptability and Easy to control，the product looks atmospheric.。