Introduction to Regenerative gas trolley forging heating furnace and heating furnace advantages and features

Regenerative gas trolley forging heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

1、Brief introduction of Regenerative gas trolley forging heating furnace

Regenerative gas trolley forging heating furnaceIt is a forging heating device using gas as fuel.。

Regenerative gas trolley forging heating furnace

2、Regenerative gas trolley forging heating furnace characteristics

The Regenerative gas trolley forging heating furnace features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Easy to maintain

The structural design of the Regenerative gas trolley forging heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Strong adaptability

The Regenerative gas trolley forging heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Regenerative gas trolley forging heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

5. Efficient heating

The Regenerative gas trolley forging heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Regenerative gas trolley forging heating furnace

3、Structural characteristics of Regenerative gas trolley forging heating furnace

The Regenerative gas trolley forging heating furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. furnace chamber

A space for holding metallic materials for heating.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. Radiation chamber

The heat load of the main place for Regenerative gas trolley forging heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Regenerative gas trolley forging heating furnace

4、Advantages of Regenerative gas trolley forging heating furnace principle

Regenerative gas trolley forging heating furnaceat runtime,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it is mainly composed of Radiation chamber, ventilation system, furnace chamber, convection chamber and ventilation system，Regenerative gas trolley forging heating furnaceSimple structure and advanced technology.，is a Regenerative gas trolley forging heating furnace newly developed by One-combustion energy saving。

Regenerative gas trolley forging heating furnace

5、Introduction of advantages of Regenerative gas trolley forging heating furnace

Regenerative gas trolley forging heating furnaces have the following advantages.

1. Multiple fuel options

Although the Regenerative gas trolley forging heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Intelligent control

The Regenerative gas trolley forging heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Regenerative gas trolley forging heating furnace can significantly reduce energy consumption, thus reducing operating costs.

4. Rapid temperature rise

The Regenerative gas trolley forging heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Efficient combustion

The Regenerative gas trolley forging heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Regenerative gas trolley forging heating furnace

6、Brief introduction of One-combustion energy saving

One-combustion energy saving is a professional manufacturer of heating furnace, which produces Regenerative gas trolley forging heating furnace with the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency. and reasonable prices. Welcome new and old customers to visit and buy. Click online consultation。

One-combustion energy saving

Regenerative gas trolley forging heating furnaceit has the functions of anneal, normalizing, hardening and tempering, temper and Casting heating，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。