Introduction to Walking beam annealing furnace, advantages, characteristics and principles of forging furnace

Walking beam annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a common Walking beam annealing furnace，Stable and reliable,Strong adaptability,Stable and reliable,energy saving and environmental protection,energy-efficient，It has the functions of Energy conservation and environmental protection, Metal forging heating, Metal heat treatment, Metal melting and casting and Improve production efficiency，is based on One-combustion energy saving is carefully developed by One-combustion energy saving combined with advanced technology。

1、Brief introduction of Walking beam annealing furnace

Walking beam annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，The overall structural design is simple and novel.，it has the structure of convection chamber, ventilation system, recovery of waste heat, furnace chamber and ventilation system，the product looks atmospheric.，is designed by One-combustion energy saving with advanced technology。

Walking beam annealing furnace

2、Walking beam annealing furnace HD picture

The beauty of Walking beam annealing furnace comes from the detail design.。

Walking beam annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Advantages of Walking beam annealing furnace principle

Walking beam annealing furnaceat work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，widely used in material, shipping, automobile, petroleum, war industry and other fields。

Walking beam annealing furnace

4、Introduction of Walking beam annealing furnace characteristics

Walking beam annealing furnace has the following characteristics

1. Stable and reliable

The Walking beam annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Walking beam annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Easy to maintain

The structural design of the Walking beam annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Strong adaptability

The Walking beam annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Walking beam annealing furnace

5、Walking beam annealing furnace structure composition

The Walking beam annealing furnace has the following structure

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. furnace chamber

A space for holding metallic materials for heating.

3. Radiation chamber

The heat load of the main place for Walking beam annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Walking beam annealing furnace

Walking beam annealing furnacemultifunctional, with functions such as Casting heating, temper, anneal, hardening and tempering and anneal，widely used inchemical industry,metallurgy,building materials,electron,pharmacy and other industries。