Introduction to Combination walking back and forth furnace, Forging furnace specifications, model parameters

Combination walking back and forth furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

1、Brief introduction of Combination walking back and forth furnace

Combination walking back and forth furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is based on One-combustion energy saving is a kind of Combination walking back and forth furnace manufactured by One-combustion energy saving。

Combination walking back and forth furnace

2、Combination walking back and forth furnace advantage

The advantages of Combination walking back and forth furnace are as follows:

1. Wide application range

The Combination walking back and forth furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Uniform heating

The Combination walking back and forth furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Wide application range

The Combination walking back and forth furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Combination walking back and forth furnace can significantly reduce energy consumption, thus reducing operating costs.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Combination walking back and forth furnace

3、Combination walking back and forth furnace characteristics

The Combination walking back and forth furnace features are as follows:

1. Stable and reliable

The Combination walking back and forth furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Strong adaptability

The Combination walking back and forth furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Easy to maintain

The structural design of the Combination walking back and forth furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Strong adaptability

The Combination walking back and forth furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Combination walking back and forth furnace

4、Combination walking back and forth furnace structure

The Combination walking back and forth furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. Radiation chamber

The heat load of the main place for Combination walking back and forth furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Combination walking back and forth furnace

5、Combination walking back and forth furnace use

The purpose of Combination walking back and forth furnace is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Combination walking back and forth furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal forging heating

The Combination walking back and forth furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal heat treatment

In addition to forging heating, Combination walking back and forth furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the Combination walking back and forth furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal heat treatment

In addition to forging heating, Combination walking back and forth furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Combination walking back and forth furnace

6、Combination walking back and forth furnace quotation

The Combination walking back and forth furnace price is introduced as follows:

1. product model

Because the specifications and models of products are different, their specifications and configurations are not the same. As we all know, the cost of products with high configuration will be higher, and vice versa, because there is a close relationship between product sales price and specifications and models.

2. Overall configuration

The difference in Combination walking back and forth furnace configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

3. Brand strength

At present, there are various brands of Combination walking back and forth furnace in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Combination walking back and forth furnace are different.

4. technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

5. regional difference

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

Combination walking back and forth furnace

Combination walking back and forth furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，multifunctional, with functions such as hardening and tempering, Casting heating, hardening and tempering, Forging heating and heat treatment。