Introduction to Regenerative walking back and forth furnace, heating furnace specifications, model parameters

Regenerative walking back and forth furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a Regenerative walking back and forth furnace，energy saving and environmental protection,Stable and reliable,energy-efficient,energy saving and environmental protection,energy-efficient，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the product looks beautiful.。The following is to introduce the Regenerative walking back and forth furnace:

1、Brief introduction of Regenerative walking back and forth furnace

Regenerative walking back and forth furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，multifunctional, with functions such as hardening and tempering, Casting heating, quench, anneal and temper，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

Regenerative walking back and forth furnace

2、Regenerative walking back and forth furnace structure composition

The Regenerative walking back and forth furnace has the following structure

1. Radiation chamber

The heat load of the main place for Regenerative walking back and forth furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Regenerative walking back and forth furnace

3、Introduction of Regenerative walking back and forth furnace characteristics

Regenerative walking back and forth furnace has the following characteristics

1. Easy to maintain

The structural design of the Regenerative walking back and forth furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Easy to control

The combustion system and ventilation system of the Regenerative walking back and forth furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Regenerative walking back and forth furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Stable and reliable

The Regenerative walking back and forth furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Regenerative walking back and forth furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Regenerative walking back and forth furnace

4、Introduction of advantages of Regenerative walking back and forth furnace

Regenerative walking back and forth furnaces have the following advantages.

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Intelligent control

The Regenerative walking back and forth furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Regenerative walking back and forth furnace can significantly reduce energy consumption, thus reducing operating costs.

4. Wide application range

The Regenerative walking back and forth furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Rapid temperature rise

The Regenerative walking back and forth furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Regenerative walking back and forth furnace

5、Advantages of Regenerative walking back and forth furnace principle

Regenerative walking back and forth furnaceat work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.。

Regenerative walking back and forth furnace

6、Regenerative walking back and forth furnace quotation

The Regenerative walking back and forth furnace price is introduced as follows:

1. marketing channel

One-combustion energy saving has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

2. Manufacturer's sales model

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

3. Product technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

4. select a qualified person

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

5. mass discrepancy

Quality is the key factor to determine the price. A high-quality product requires a lot of manpower, material resources and raw materials, so the manufacturing cost of the product is high. Therefore, the price of high-quality products is high. On the contrary, the price of Regenerative walking back and forth furnace is low.

Regenerative walking back and forth furnace

Regenerative walking back and forth furnaceit has the characteristics of Easy to maintain, Easy to control, Strong adaptability, Stable and reliable and energy saving and environmental protection，it is mainly composed of ventilation system, furnace chamber, recovery of waste heat, combustor and ventilation system，widely used in automobile, metallurgy, Machinery manufacturing, Household necessities, war industry and other fields。