Introduction to Chain track iron core annealing furnace, how much is the price of the forging furnace?

Chain track iron core annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the characteristics of Strong adaptability, energy saving and environmental protection, Easy to control, Easy to maintain and Stable and reliable。

1、Brief introduction of Chain track iron core annealing furnace

Chain track iron core annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it is widely used inmachinery,surface treatment,chemical industry,material,pharmacy and other industries，it is mainly composed of ventilation system, furnace chamber, furnace chamber, ventilation system and Radiation chamber，Chain track iron core annealing furnaceSimple structure and reliable operation.，reliable quality，favorable price。

Chain track iron core annealing furnace

2、Structural characteristics of Chain track iron core annealing furnace

The Chain track iron core annealing furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. Radiation chamber

The heat load of the main place for Chain track iron core annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Chain track iron core annealing furnace

3、Chain track iron core annealing furnace principle

Chain track iron core annealing furnaceHeat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，is based on One-combustion energy saving is a kind of Chain track iron core annealing furnace manufactured by One-combustion energy saving。

Chain track iron core annealing furnace

4、Chain track iron core annealing furnace characteristics

The Chain track iron core annealing furnace features are as follows:

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Strong adaptability

The Chain track iron core annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Stable and reliable

The Chain track iron core annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to maintain

The structural design of the Chain track iron core annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Chain track iron core annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Chain track iron core annealing furnace

5、Chain track iron core annealing furnace price

The Chain track iron core annealing furnace price is introduced as follows:

1. market supply and demand

The market has great fluctuation, which is also the key factor that leads to the imbalance and instability of supply and demand, and then leads to great changes in product prices. Only after a comprehensive understanding and investigation of the market can we make a reasonable decision, and then we can formulate a Chain track iron core annealing furnace price sales plan that customers are satisfied with, and the main reason for its price rationality is also reflected here.

2. regional advantages

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving address:Shandong(Province), where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

3. Product technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

4. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Chain track iron core annealing furnace price and service can meet the actual needs of customers.

5. Self quality

The selling price of excellent quality products is also high, so users should also consider the quality and price of products comprehensively when purchasing products, so as to buy products with high cost performance.

Chain track iron core annealing furnace

6、Company selection

Choosing a suitable Chain track iron core annealing furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Chain track iron core annealing furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Chain track iron core annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a popular Chain track iron core annealing furnace。