Introduction to Chain heating furnace, introduction to Forging furnace advantages and characteristics

Chain heating furnaceIt is a forging heating device using gas as fuel.，at the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，multifunctional, with functions such as anneal, Forging heating, heat treatment, Casting heating and normalizing。

1、Brief introduction of Chain heating furnace

Chain heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，It has a wide range of uses, including Metal forging heating, Energy conservation and environmental protection, Metal heat treatment, Metal forging heating and Metal melting and casting，is a Chain heating furnace newly developed by One-combustion energy saving。

Chain heating furnace

2、Introduction of Chain heating furnace characteristics

Chain heating furnace has the following characteristics

1. Easy to control

The combustion system and ventilation system of the Chain heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Easy to maintain

The structural design of the Chain heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Chain heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Chain heating furnace

3、Structural characteristics of Chain heating furnace

The Chain heating furnace has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. Radiation chamber

The heat load of the main place for Chain heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. furnace chamber

A space for holding metallic materials for heating.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Chain heating furnace

4、Chain heating furnace HD real picture

Take a look at the high-definition drawings of Chain heating furnace with excellent quality for our customers' reference.。

Chain heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Chain heating furnace principle

Chain heating furnaceat work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it is widely used in surface treatment, electron, machinery, material, petroleum and other industries，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Chain heating furnace

6、Chain heating furnace quotation

The Chain heating furnace price is introduced as follows:

1. Quality advantages and disadvantages

Quality is an important and fundamental factor that affects the price of Chain heating furnace. In the final analysis, its price depends on its quality. Usually, Chain heating furnace with better quality will cost more, and such products have better effects, longer service life and more advanced technology. A Chain heating furnace with a relatively general quality will cost less, have a shorter service life and have a relatively general use effect.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. Company size

Although there are many manufacturers of products in Shandong(Province), there are certain differences in the scale and strength of each manufacturer. Some manufacturers are large in scale and strength, some are small in scale, and some manufacturers do not have their own production workshops and belong to middlemen. Relatively speaking, the prices of products formulated by middlemen are higher.

4. technology content

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

5. Different regions

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

Chain heating furnace

Chain heating furnaceHeat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，Strong adaptability,energy-efficient,Stable and reliable,energy saving and environmental protection,Easy to control，is a kind of high quality and low price Chain heating furnace。