What is a Anchor chain aluminum rod heating furnace? How much is the price of the forging furnace?

Anchor chain aluminum rod heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

1、Brief introduction of Anchor chain aluminum rod heating furnace

Anchor chain aluminum rod heating furnaceIt is a forging heating device using gas as fuel.，It has a wide range of uses, including Metal heat treatment, Metal heat treatment, Energy conservation and environmental protection, Improve production efficiency and Metal tempering，features include Easy to maintain, Stable and reliable, Strong adaptability, energy-efficient and Easy to control，customizable。

Anchor chain aluminum rod heating furnace

2、Anchor chain aluminum rod heating furnace advantage

The advantages of Anchor chain aluminum rod heating furnace are as follows:

1. Multiple fuel options

Although the Anchor chain aluminum rod heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Intelligent control

The Anchor chain aluminum rod heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Efficient combustion

The Anchor chain aluminum rod heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Rapid temperature rise

The Anchor chain aluminum rod heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Anchor chain aluminum rod heating furnace

3、Anchor chain aluminum rod heating furnace HD real shot

The following is the live video of Anchor chain aluminum rod heating furnace designed and produced by One-combustion energy saving for users, from which we can see the Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved. of One-combustion energy savingProduction and processing的Anchor chain aluminum rod heating furnace.。

Anchor chain aluminum rod heating furnace

As you can see from the live video.，One-combustion energy saving at work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

4、Anchor chain aluminum rod heating furnace work site real shot

The details of the Anchor chain aluminum rod heating furnace are displayed in many directions, and the Anchor chain aluminum rod heating furnace is beautiful and cost-effective.。

Anchor chain aluminum rod heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Anchor chain aluminum rod heating furnace structure

The Anchor chain aluminum rod heating furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. Radiation chamber

The heat load of the main place for Anchor chain aluminum rod heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Anchor chain aluminum rod heating furnace

6、Structural advantages of Anchor chain aluminum rod heating furnace

The Anchor chain aluminum rod heating furnace has the following structure

1. Radiation chamber

The heat load of the main place for Anchor chain aluminum rod heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. furnace chamber

A space for holding metallic materials for heating.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Anchor chain aluminum rod heating furnace

Anchor chain aluminum rod heating furnaceit has the functions of temper, hardening and tempering, heat treatment, quench and Forging heating，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。