Introduction to Gas chain heat treatment furnace and heating furnace working principle

Gas chain heat treatment furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，features include energy saving and environmental protection, Strong adaptability, Easy to control, Easy to maintain and energy-efficient。

1、Brief introduction of Gas chain heat treatment furnace

Gas chain heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Structure consists of recovery of waste heat, ventilation system, Radiation chamber, convection chamber, furnace chamber and so on，This productThe structural design is simple, novel and special.，it is an ideal choice for customers to buy Gas chain heat treatment furnace。

Gas chain heat treatment furnace

2、Gas chain heat treatment furnace HD picture

HD picture of One-combustion energy saving Gas chain heat treatment furnace,Stable and reliable。

Gas chain heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Introduction of advantages of Gas chain heat treatment furnace

Gas chain heat treatment furnaces have the following advantages.

1. Efficient combustion

The Gas chain heat treatment furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. easy to operate

The operation interface of the Gas chain heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Improve product quality

Because the Gas chain heat treatment furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Wide application range

The Gas chain heat treatment furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Uniform heating

The Gas chain heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Gas chain heat treatment furnace

4、Advantages of Gas chain heat treatment furnace principle

Gas chain heat treatment furnaceat the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

Gas chain heat treatment furnace

5、Gas chain heat treatment furnace application

Gas chain heat treatment furnaces have the following purposes.

1. Metal tempering

By properly heating and cooling the metal material, the Gas chain heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Improve production efficiency

The Gas chain heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal heat treatment

In addition to forging heating, Gas chain heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Improve production efficiency

The Gas chain heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Gas chain heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Gas chain heat treatment furnace

6、Gas chain heat treatment furnace price consultation

The Gas chain heat treatment furnace price is introduced as follows:

1. technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

2. regional difference

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

3. raw material

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

4. Brand strength

At present, there are various brands of Gas chain heat treatment furnace in Jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Gas chain heat treatment furnace are different.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Gas chain heat treatment furnace

Gas chain heat treatment furnaceusually used in automobile, material, aerospace, heat treatment, machinery and other fields，multifunctional, with functions such as Forging heating, heat treatment, Casting heating, normalizing and anneal。