What is a Large chain furnace? Introduction to the Working Principle of Forging furnace

Large chain furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the main structure includes convection chamber, recovery of waste heat, ventilation system, ventilation system, Radiation chamber and so on，it has the characteristics of energy saving and environmental protection, energy-efficient, Easy to maintain, Easy to control and Strong adaptability。The following is to introduce the Large chain furnace:

1、Brief introduction of Large chain furnace

Large chain furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has the functions of quench, Casting heating, Forging heating, hardening and tempering and temper，It has the functions of Metal tempering, Metal forging heating, Metal heat treatment, Metal tempering and Metal melting and casting，be loved by our customers.。

Large chain furnace

2、Introduction of advantages of Large chain furnace

The advantages of Large chain furnace are as follows:

1. Rapid temperature rise

The Large chain furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Efficient combustion

The Large chain furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Large chain furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Wide application range

The Large chain furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Large chain furnace

3、Large chain furnace use

The purpose of Large chain furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Large chain furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Large chain furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal tempering

By properly heating and cooling the metal material, the Large chain furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal forging heating

The Large chain furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Energy conservation and environmental protection

The Large chain furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Large chain furnace

4、Large chain furnace structure composition

The Large chain furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. Radiation chamber

The heat load of the main place for Large chain furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. furnace chamber

A space for holding metallic materials for heating.

Large chain furnace

5、Large chain furnace HD picture

High-definition pictures at a glance, beautifully designed atmosphere, stylish, extraordinary temperament, for your visit.。

Large chain furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Large chain furnacethe advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，It can be used for Energy conservation and environmental protection, Improve production efficiency, Metal forging heating, Metal heat treatment, Metal melting and casting, Metal tempering and so on。