Yiran178-6053-1222

What is a Environmental protection chain furnace? Introduction to the advantages and characteristics of the heating furnace

2025-5-27

Environmental protection chain furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.,at the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.,It has a wide range of uses, and is often used inMetal melting and casting,Energy conservation and environmental protection,Metal forging heating,Metal melting and casting,Metal tempering and so on,The structural design is more advanced and reasonable.,it is usually composed of combustor, Radiation chamber, ventilation system, recovery of waste heat and furnace chamber,was developed and designed by One-combustion energy saving。

1、Brief introduction of Environmental protection chain furnace

Environmental protection chain furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.,it is widely used in automobile, petroleum, material, light industry and building materials,It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。

Environmental protection chain furnace

Environmental protection chain furnace

2、Environmental protection chain furnace principle

Environmental protection chain furnaceat runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.,widely used in electron, chemical industry, shipping, surface treatment, heat treatment and other fields,energy-efficient,Strong adaptability,Easy to maintain,Easy to maintain,Easy to control,Widely used in Improve production efficiency, Metal heat treatment, Improve production efficiency, Metal tempering and Metal heat treatment,favorable price,reliable quality。

Environmental protection chain furnace

Environmental protection chain furnace

3、Structural advantages of Environmental protection chain furnace

The Environmental protection chain furnace has the following structure

  1. combustor
  2. The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

  3. Waste heat recovery system
  4. Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

  5. Radiation chamber
  6. The heat load of the main place for Environmental protection chain furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

  7. convection chamber
  8. The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

  9. ventilation system
  10. Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Environmental protection chain furnace

Environmental protection chain furnace

4、Functional advantages of Environmental protection chain furnace

Environmental protection chain furnaces have the following advantages.

  1. Uniform heating
  2. The Environmental protection chain furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

  3. Rapid temperature rise
  4. The Environmental protection chain furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

  5. Improve product quality
  6. Because the Environmental protection chain furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

  7. easy to operate
  8. The operation interface of the Environmental protection chain furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

  9. Reduce operating costs
  10. The efficient combustion and waste heat recovery system of the Environmental protection chain furnace can significantly reduce energy consumption, thus reducing operating costs.

Environmental protection chain furnace

Environmental protection chain furnace

5、How much is the Environmental protection chain furnace?

The Environmental protection chain furnace price is introduced as follows:

  1. product function
  2. The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

  3. Manufacturer scale
  4. Direct selling by manufacturers and sales by middlemen will also affect product prices. There are not too many links among direct selling products, so the cost required by manufacturers is low, and the price of Environmental protection chain furnace is low. Customers can also put products into production in advance. On the contrary, when purchasing products from middlemen, there are not only many links, but also the price of Environmental protection chain furnace is much higher, so customers should choose products directly sold by manufacturers when purchasing.

  5. select a qualified person
  6. The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

  7. Reasonable sales model
  8. What kind of sales methods manufacturers have has an intuitive impact on product prices. If it is a direct selling manufacturer, the manufacturer sells directly to customers, and there is no intermediate price difference, which can benefit customers to a greater extent.

  9. regional advantages
  10. The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

Environmental protection chain furnace

Environmental protection chain furnace

6、One-combustion energy saving's strength

The company has many years of Environmental protection chain furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

One-combustion energy saving

Environmental protection chain furnaceit has the characteristics of Stable and reliable, Easy to control, Stable and reliable, energy saving and environmental protection and Easy to control,the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。