Introduction to Roller type heat treatment heating furnace, Forging furnace advantages, characteristics and principles

Roller type heat treatment heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，energy-efficient,energy saving and environmental protection,Stable and reliable,Strong adaptability,energy-efficient，was developed and designed by One-combustion energy saving。The following is to introduce the Roller type heat treatment heating furnace:

1、Brief introduction of Roller type heat treatment heating furnace

Roller type heat treatment heating furnaceIt is a forging heating device using gas as fuel.，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.。

Roller type heat treatment heating furnace

2、Roller type heat treatment heating furnace characteristics

The Roller type heat treatment heating furnace features are as follows:

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Roller type heat treatment heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Efficient heating

The Roller type heat treatment heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Strong adaptability

The Roller type heat treatment heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Stable and reliable

The Roller type heat treatment heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to control

The combustion system and ventilation system of the Roller type heat treatment heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Roller type heat treatment heating furnace

3、Roller type heat treatment heating furnace characteristics

The Roller type heat treatment heating furnace features are as follows:

1. Efficient heating

The Roller type heat treatment heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Stable and reliable

The Roller type heat treatment heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Roller type heat treatment heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Strong adaptability

The Roller type heat treatment heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Easy to control

The combustion system and ventilation system of the Roller type heat treatment heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Roller type heat treatment heating furnace

4、Roller type heat treatment heating furnace structure

The Roller type heat treatment heating furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Radiation chamber

The heat load of the main place for Roller type heat treatment heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Roller type heat treatment heating furnace

5、Roller type heat treatment heating furnace function

Roller type heat treatment heating furnacemultifunctional, with functions such as normalizing, temper, quench, anneal and hardening and tempering。

Roller type heat treatment heating furnace

6、How much is the Roller type heat treatment heating furnace?

The Roller type heat treatment heating furnace price is introduced as follows:

1. Brand strength

At present, there are various brands of Roller type heat treatment heating furnace in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Roller type heat treatment heating furnace are different.

2. Company size

Although there are many manufacturers of products in Shandong(Province), there are certain differences in the scale and strength of each manufacturer. Some manufacturers are large in scale and strength, some are small in scale, and some manufacturers do not have their own production workshops and belong to middlemen. Relatively speaking, the prices of products formulated by middlemen are higher.

3. raw material

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

4. product costs

When it comes to cost, I believe everyone has heard the saying "You get what you want for a price", which shows that the upfront cost of a product is directly proportional to its value. The upfront cost is high, the value is high, the quality is good, and the price is naturally high. The less the cost is, the lower the price is, and the quality is not good.

5. Model specification

Products generally have a variety of specifications and models to meet the multiple needs of manufacturing. The same is true for Roller type heat treatment heating furnace, which have different models and different performances. Therefore, these are all factors that affect the price change of Roller type heat treatment heating furnace.

Roller type heat treatment heating furnace

Roller type heat treatment heating furnaceit has the characteristics of Easy to control, energy saving and environmental protection, Stable and reliable, Easy to maintain and Strong adaptability，Commonly used inImprove production efficiency,Energy conservation and environmental protection,Metal melting and casting,Metal tempering,Metal heat treatment and so on，at work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。